ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 08-14-2005   #1
RHanselman
 
RHanselman's Avatar
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
Default Trans popping out of first gear!

Well, my first big problem...

My trans is popping of first gear when I let off the gas. Any ideas?

Also, I've not been keeping up on the ZF situation on the listserver. What is the latest on where to get a transmission.

Cheers,
Ron
RHanselman is offline   Reply With Quote
Old 08-15-2005   #2
Jeffvette
Guest
 
Posts: n/a
Default

Ron, I can get one through my local chevy dealership for 1,095. It might be a pain to get it to you if not shipped, but let me know.

Sounds like you synchro is going out in first.
  Reply With Quote
Old 08-15-2005   #3
RHanselman
 
RHanselman's Avatar
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
Default

Now that I think about it, some times it's been a little hard to get it into first gear. Might have been trying to tell me something?

First I'll go down to the local dealer here in Vegas to see what I can get. If I have trouble getting a good deal I'll let you know.

Cheers,
RH
RHanselman is offline   Reply With Quote
Old 08-15-2005   #4
W i l l
 
Join Date: Jul 2005
Posts: 77
Default

Ron,

Bill Boudreau can tell you exactly what is causing the transmission to slip out of gear. From what I remember from another member who had the same symption, Bill said there was a problem with a spring that pushes against a detent ball. That being said, I'm almost sure that $1,100 or $1,200 for a new transmission would be about as cheap or cheaper than having the old one repaired. Give Bill an email just for grins.

Good luck,

Will
W i l l is offline   Reply With Quote
Old 08-15-2005   #5
Z Factor
 
Z Factor's Avatar
 
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
Default

Quote:
Originally Posted by RHanselman
Now that I think about it, some times it's been a little hard to get it into first gear. Might have been trying to tell me something?
Hello, and welcome to the forum.

I agree with Jeff in that it is probably a synchronizer problem. I dont think you will need to replace the entire transmission however.

Good luck and keep us posted.

Z Factor is offline   Reply With Quote
Old 08-15-2005   #6
RHanselman
 
RHanselman's Avatar
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
Default

Quote:
Originally Posted by W i l l
Ron,

Bill Boudreau can tell you exactly what is causing the transmission to slip out of gear. From what I remember from another member who had the same symption, Bill said there was a problem with a spring that pushes against a detent ball. That being said, I'm almost sure that $1,100 or $1,200 for a new transmission would be about as cheap or cheaper than having the old one repaired. Give Bill an email just for grins.

Good luck,

Will
Bill emailed me last night with some advice. The trans is making a noise over the noise of the B&B which I didn't tell him about. I will see if he has any time to look at it. I hear he has a sweet deal for his beefed up versions.

Cheers,
Ron
RHanselman is offline   Reply With Quote
Old 08-15-2005   #7
FU
 
FU's Avatar
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
Default

Quote:
Originally Posted by RHanselman
Bill emailed me last night with some advice. The trans is making a noise over the noise of the B&B which I didn't tell him about. I will see if he has any time to look at it. I hear he has a sweet deal for his beefed up versions.

Cheers,
Ron
His beefed up trannys are fantastic !
__________________
Frank Urbo.

NCM Lifetime member # 982
Registry Founding # 237
FU is offline   Reply With Quote
Old 08-22-2005   #8
RHanselman
 
RHanselman's Avatar
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
Talking

OK,

Here is what I‘ve decided to do if the trans is bad and it needs a total rebuild...

Bill B will buy a new trans (with my money) and take the new parts and rebuild mine.

He will balance and blue print and stick it all back in my original case with matching numbers.

Cost:
$1200 or less for the trans (his cost)
$600 for the balance, blue print, and rebuild
He keeps the other parts

I'm taking it to him on Thu this week for the diagnosis.

Cheers,
RH
RHanselman is offline   Reply With Quote
Old 08-22-2005   #9
Nick
 
Join Date: Jul 2005
Location: Auburn, Washington
Posts: 586
Default

This sounds like a pretty good deal to me, Ron. Let us know how it turns out!
__________________
Nick
ZR-1 Net Registry Founding Member #32 - lapsed...
Nick is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020