Gas door emblem removal..... - ZR-1 Net Registry Forums

Roadster · 06-03-2016

Detailing the Z, I figured I would remove the emblem from the gas door. Not a good thought, as the outer rings broke and so did a stud. Also not remembering that there is adhesive on the emblem which holds it in place.
What is the best way to remove emblem safety without doing further damage?
I have a replacement ready to go!!! Thanks for any info.......

Ok, figured it out.......needed string, a long punch & my 5 lb. mini sledge did the trick....now for adhesive removal....
Would post pics, but I get an upload error everytime I try. First time this has happen......

06-03-2016	#1
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,913	Gas door emblem removal..... Detailing the Z, I figured I would remove the emblem from the gas door. Not a good thought, as the outer rings broke and so did a stud. Also not remembering that there is adhesive on the emblem which holds it in place. What is the best way to remove emblem safety without doing further damage? I have a replacement ready to go!!! Thanks for any info....... Ok, figured it out.......needed string, a long punch & my 5 lb. mini sledge did the trick....now for adhesive removal.... Would post pics, but I get an upload error everytime I try. First time this has happen...... __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member Last edited by Roadster; 06-03-2016 at 12:40 PM.