03-15-2021 | #25 |
Join Date: Aug 2005
Location: Fishers, IN
Posts: 781
|
porting injector housings to 36MM
Who?s doing the heads and what size valves?
What rpm do you expect peak power? Last time I measured the injector housings, they were about 4" long centerline (101.6mm). From that you can work out either diameter or volume, if the other is known.
__________________
Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development Last edited by tpepmeie; 03-15-2021 at 08:27 PM. |
|
|