Brass vs. Plastic Headlight Motor Gears?

[rhipsher]

If its making the Ca Clunk Ca Clunk Ca Clunk Ca Clunk noise then its most likely that you just have to replace the 3 9/16 dia x .425 long plastic pieces that have crubled that sit inside th gear. You can pic them up at any auto parts store in the window regulator section for $9.00 a set. You should'nt have to replace the gears. But Id go with brass if I ever had to replace the gears.

[ZZZZZR1]

Originally Posted by rhipsher

If its making the Ca Clunk Ca Clunk Ca Clunk Ca Clunk noise then its most likely that you just have to replace the 3 9/16 dia x .425 long plastic pieces that have crubled that sit inside th gear. You can pic them up at any auto parts store in the window regulator section for $9.00 a set. You should'nt have to replace the gears. But Id go with brass if I ever had to replace the gears.

Tried a local auto parts and they hadnt a clue...

Any place you recommend and or a part number for the plastic bushings?

Thanks

David

[rhipsher]

Originally Posted by ZZZZZR1

Tried a local auto parts and they hadnt a clue...

Any place you recommend and or a part number for the plastic bushings?

Thanks

David

They are not going to know anything about it. Just go into Orielly's and walk back to the window regulator section and you will see them either in packs of three or two. They are 9/16 diameter round X about .425 long.