|
10-23-2016
|
#1 |
 Join Date: Oct 2004
Posts: 1,889
|
ISO Tech1 adapter 3000053 (16 - 12 ALDL)
I've a friend with a '95 ParkAve Buick and I need this adapter to do some checks for him. The car is OBD1 but has OBD2 connector. I'm quite sure my Tech2 won't do OBD1(on the 16 pin ALDL) and I've got it "on loan" to a fellow that's not close to me anyway.
Someone in NOVA? I might like to "borrow" if I could. There's a couple dealers in the area that might have and I buy from so Monday I'll likely attempt to have a conversation. If they have, they actually might likely NOT be able to put their "hands on it". Buy? I might to complete the Tech1 package I have. Trade? I've many cartridges for the Tech1 |
|
|
|
10-23-2016
|
#2 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
10-23-2016
|
#3 | |
|
Join Date: Oct 2004
Posts: 1,889
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Quote:
Needs to be this: http://www.ebay.com/itm/KENT-MOORE-T...429027&vxp=mtr Last edited by WVZR-1; 10-23-2016 at 11:38 AM. |
|
|
|
|
|
10-24-2016
|
#4 |
 Join Date: Dec 2014
Location: Long Island, NY
Posts: 295
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Let me check my Tech1A case for the adapter, and I'll mail it along with the DERM module you sent me. In a few weeks I'm picking up a new Tech1A that has every adapter & cartridge...hopefully it has this P/N.
__________________
1990 ZR-1 #1587 1990 ZR-1 #1727 |
|
|
|
|
10-24-2016
|
#5 | |
|
Join Date: Oct 2004
Posts: 1,889
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Quote:
This fellows Park Avenue has been somewhat of an adventure. The last time he had it in a shop they had it for 2 weeks and couldn't get a crank. I was sure it was a VATS failure after I spoke to him and I went to the shop with my VATS Interrogator expecting to undo the 2 pin connector, plug in my Interrogator and crank the car. Maybe in '94 or so on many GM's the pins were added to a multi-pin bulkhead style connector and that was a disappointment. I was so sure it was the failure I told the shop to cut the wires and proceed. They wanted to do a several hundred $$$ fix. I ended up driving 40+ miles to get the resistors (string of three), solder and 3/32 heat shrink and showed the shop how to accomplish the fix. To use my Interrogator I would have needed to use this adapter http://www.ebay.com/itm/Kent-Moore-T...763558&vxp=mtr Last edited by WVZR-1; 10-24-2016 at 08:24 AM. |
|
|
|
|
|
10-24-2016
|
#6 |
|
Join Date: Dec 2014
Location: Long Island, NY
Posts: 295
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Sorry, I don't have that particular adapter.
I checked both Tech1A kits we bought recently, and reviewed the pictures of the new kit I'm getting soon.
__________________
1990 ZR-1 #1587 1990 ZR-1 #1727 |
|
|
|
|
10-24-2016
|
#7 | |
|
Join Date: Oct 2004
Posts: 1,889
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Quote:
|
|
|
|
|
|
10-24-2016
|
#8 |
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,469
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Sorry Dave, I have 3000055 but not 3000053.
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
10-24-2016
|
#9 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Dave I will look tonight when I return home in my Tech 1A cases.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-24-2016
|
#10 | ||
|
Join Date: Oct 2004
Posts: 1,889
|
Re: ISO Tech1 adapter 3000053 (16 - 12 ALDL)
Quote:
What is a 3000055? I've seen that # mentioned a time or two but I'm not familiar with it. Quite curious!! Quote:
*** I stopped at the dealer today and no one could put the "hands on" - company tools OR in a couple techs boxes where I thought it might more likely have been. Last edited by WVZR-1; 10-24-2016 at 04:26 PM. |
||
|
|
|
 |
|
|
Linear Mode
