|
07-23-2020
|
#1 |
 
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,105
|
90 CDM extra/loose ground shield - need help with wiring
Putting the CDM back in the 90 after getting a missing CDM base cover, I have a loose ground shield wire. I do not see a broken connector nor a terminal missing a wire. I have went over the FSM and have looked at pictures from other CDM's. I seem to have a total of 4 ground shield wires, three are hooked into the harness connector as shown in the FSM. Is there possible TWO wires that go to one connector? I don't want to leave a ground shield wire loose but I can't figure out where it goes. Any help would be appreciated .
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
|
 |
|
|
Linear Mode
