|
04-17-2007
|
#1 |
|
Join Date: Sep 2006
Posts: 35
|
another problem with lighter
I have a 1991 ZR1 the cig lighter doesnt work and the brake lights do (this makes me think its not the fuse) let me know if you have any ideas
thanks chris |
|
|
|
04-17-2007
|
#2 |
|
Guest
Posts: n/a
|
Re: another problem with lighter
You have a ohm meter?
|
|
|
|
04-17-2007
|
#3 |
|
Join Date: Sep 2006
Posts: 35
|
Re: another problem with lighter
is that a volt meter cause if it is yes i have one and there is no read out to it when i check it
|
|
|
|
|
10-26-2007
|
#4 |
|
Join Date: Aug 2007
Location: Bison, SD
Posts: 106
|
Re: another problem with lighter
mine also quit....and the fuse is good...also a 91
|
|
|
|
|
10-26-2007
|
#5 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: another problem with lighter
Pull the console shift plate top. its possible the wire behind the socket is loose. Also mine tends to rotate the housing with causes intermittent contact. Try turning the lighter socket a quarter of a turn to the right or left. May fix the problem
|
|
|
|
|
05-04-2008
|
#6 |
|
Join Date: Sep 2006
Posts: 35
|
Re: another problem with lighter
i took the cup holder part of the console up and the cig lighter was unplugged from the back i plugged it in and it works great thanks for the replys
|
|
|
|
|
10-14-2008
|
#7 |
|
Join Date: Sep 2008
Location: Vancouver
Posts: 224
|
Re: another problem with lighter
i had a cig lighter socket in a used car i bought that wasn't working and it was because of excessive scum and corrosion in the socket preventing good contact points to complete the electrical circuit. this happends alot with cig lighter sockets that get used alot by smokers. so if the socket looks corroded, a good cleaning of the socket could fix the problem. i know you already fixed your issue but i thought i would add this in for anyone else having this issue later.
Chris |
|
|
|
 |
|
|
Linear Mode
