front plate with splash ZR-1 - Page 2 - ZR-1 Net Registry Forums

Prez1967 · 11-12-2020

I'll take one for my '94! Let me know how you'd like payment

aafc · 11-12-2020

I'am using a front plate from a 1993 ZR-1 corvette for scanning. I
believe 1991 thru 1995 corvette front bumper's are all the same.
When i have them made i will let everyone know when ready to ship. Send
no payment until then i use PAYPAL. PM your name and address plus what
year 1990 style or 1991-1995 style to me.
thanks
John

RUSSELL · 11-20-2020

If your still making or have any for sale I will take one for my 91 please

JThomas · 11-20-2020

I sent you a PM for one cover for a 1991 Corvette ZR-1.

aafc · 11-20-2020

UPDATE: Just got off the phone with 3D print The 1991 thru 1995 front
plate with ZR-1 Splash will be ready to ship within 6 to 10 days.
I will have 30 plates for 1990 and 30 plates for 1991 thru 1995 ZR-1's at
this time. Each plate will cost $ 85.00 shipping included, I accept PAYPAL.
do not send any payment until i contact your by PM. If I missed any thing
just let me know.
Thank You
John

-=Jeff=- · 11-20-2020

What material is it printed out of? Is it a smooth finish? Any pictures of the part in the form we would get it? Interested in one for a 1990

aafc · 11-21-2020

Jeff,
I do not have the type of "plastic" that is used to make the front plates. I
will call Monday to found out. The finish is smooth and the ZR-1 Splash is
recessed into the front plate.
Here is the 1990 front plate.

-=Jeff=- · 11-21-2020

Looks very nice, I like the idea of the splash. I have the original ZR-1 style in my front cover.

I assume the provisions are on the bottom for mounting, are the hole already there or do they need to be added?

My best guess on material would be ABS but I will wait to hear back from you

aafc · 11-21-2020

Jeff,
The ZR-1 Splash front plate was made from my org. 1990 front plate. So the holes line up with the bumper. I installed this ZR-1 Splash on my 1990 Zr-1
and if fits perfectly.

Pm me your address to send the plate to. Send no payment until i PM you.
John

RichS · 11-23-2020

I'd take one for my 94.

11-12-2020	#11
Prez1967 Join Date: Aug 2018 Location: Finksburg, MD Posts: 244	Re: front plate with splash ZR-1 I'll take one for my '94! Let me know how you'd like payment __________________ 1994 #353 "Bluey"

11-12-2020	#12
aafc Join Date: Feb 2010 Location: Ochlocknee, GA Posts: 426	Re: front plate with splash ZR-1 I'am using a front plate from a 1993 ZR-1 corvette for scanning. I believe 1991 thru 1995 corvette front bumper's are all the same. When i have them made i will let everyone know when ready to ship. Send no payment until then i use PAYPAL. PM your name and address plus what year 1990 style or 1991-1995 style to me. thanks John

11-20-2020	#13
RUSSELL Join Date: May 2008 Location: Brownwood Texas Posts: 117	Re: front plate with splash ZR-1 If your still making or have any for sale I will take one for my 91 please

11-20-2020	#14
JThomas Join Date: May 2008 Location: Okemos, MI. Posts: 1,186	Re: front plate with splash ZR-1 I sent you a PM for one cover for a 1991 Corvette ZR-1. __________________ Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium

11-20-2020	#15
aafc Join Date: Feb 2010 Location: Ochlocknee, GA Posts: 426	Re: front plate with splash ZR-1 UPDATE: Just got off the phone with 3D print The 1991 thru 1995 front plate with ZR-1 Splash will be ready to ship within 6 to 10 days. I will have 30 plates for 1990 and 30 plates for 1991 thru 1995 ZR-1's at this time. Each plate will cost $ 85.00 shipping included, I accept PAYPAL. do not send any payment until i contact your by PM. If I missed any thing just let me know. Thank You John

11-20-2020	#16
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,136	Re: front plate with splash ZR-1 What material is it printed out of? Is it a smooth finish? Any pictures of the part in the form we would get it? Interested in one for a 1990 __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-21-2020	#17
aafc Join Date: Feb 2010 Location: Ochlocknee, GA Posts: 426	Re: front plate with splash ZR-1 Jeff, I do not have the type of "plastic" that is used to make the front plates. I will call Monday to found out. The finish is smooth and the ZR-1 Splash is recessed into the front plate. Here is the 1990 front plate.

11-21-2020	#18
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,136	Re: front plate with splash ZR-1 Looks very nice, I like the idea of the splash. I have the original ZR-1 style in my front cover. I assume the provisions are on the bottom for mounting, are the hole already there or do they need to be added? My best guess on material would be ABS but I will wait to hear back from you __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-23-2020	#20
RichS Join Date: Nov 2013 Location: Wilkes-Barre, PA Posts: 148	Re: front plate with splash ZR-1 I'd take one for my 94. __________________ 1994 ZR-1 #198, sold [img]https://live.staticflickr.com/65535/48400173802_2a6f122cfb_n.jpg[/IMG] [COLOR=RoyalBlue]96 GrandSport#857[/COLOR],[COLOR=Red]Red Gut[/COLOR] 397 LT4, AFR heads,3:90 gears, DRM longtubes, Sepanek 700R4, Yank 3600, bla-bla... Best ET w/396 & 6-speed 11.02 @126.57 w/1.60 60' Best ET w/396 & 700r4 10.82 @124.87 w/1.48 60' 2003 DarkShadowGray Ford Lightning 460rwhp/550rwtq 12.11 @112.18 w/1.71 60'