ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > Corvette > Corvette Technical Questions

Reply
 
Thread Tools Display Modes
Old 11-13-2017   #11
karlaw
 
Join Date: Jun 2008
Location: Alberta
Posts: 85
Default Re: No Start , No Power

I have just been reading about doing a STARTER RELAY MODIFICATIONS, where you add in a relay that in effect makes a more direct 12v connection from positive battery to the purple wire leading to the starter.
I wonder if that Mod would do anything in regards to getting engine to fire ? It seems that mod is really no different than me using my jumper cable from battery to my purple wire bare spot where I touch my jumper cable into the purple wire about 1 foot before the starter. When I jump start that way, starter engages and cranks engine just fine, but won't fire , except for an occasional quick burp on first 3 seconds.
So I think I just put that mod on hold for the short term.
Is there a fuel enable relay somewhere ?


Sent from my iPhone using ZR-1 Net Registry
__________________
LT5
karlaw is offline   Reply With Quote
Old 11-14-2017   #12
QB93Z
 
QB93Z's Avatar
 
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
Default Re: No Start , No Power

Quote:
Originally Posted by karlaw View Post
I have just been reading about doing a STARTER RELAY MODIFICATIONS, where you add in a relay that in effect makes a more direct 12v connection from positive battery to the purple wire leading to the starter.
I wonder if that Mod would do anything in regards to getting engine to fire ? It seems that mod is really no different than me using my jumper cable from battery to my purple wire bare spot where I touch my jumper cable into the purple wire about 1 foot before the starter. When I jump start that way, starter engages and cranks engine just fine, but won't fire , except for an occasional quick burp on first 3 seconds.
So I think I just put that mod on hold for the short term.
Is there a fuel enable relay somewhere ?


You are correct. The Starter Relay bypass that you mention will not help you with your current symptoms.


You need to locate the Start Enable Relay and determine if the ECM and CCM are sending the start enable signal.


From the pictures you posted, the relays in that area under the dash have all been disturbed so you may need to trace the wires by color to figure out which one is the Start Enable Relay.


Jim
QB93Z is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020