Cannot clear SIR lights (seat belt and INFL REST) - Page 2 - ZR-1 Net Registry Forums

todesengel · 02-28-2011

Quote:

Originally Posted by tomtom72

I'll bet it's what Tyler said about some corrosion at the plug for the sensor. The left side connection is right where if your door leaks it will get hit.

Rob, the air bag wiring is Yellow & the connectors are three pin round connectors. The yellow is the sheath color....you will not fail to see it as it screams at you it's that bright yellow color.

Thank you much Tom!

HAWAIIZR-1 · 02-28-2011

Quote:

Originally Posted by tomtom72

I'll bet it's what Tyler said about some corrosion at the plug for the sensor. The left side connection is right where if your door leaks it will get hit.

Rob, the air bag wiring is Yellow & the connectors are three pin round connectors. The yellow is the sheath color....you will not fail to see it as it screams at you it's that bright yellow color.

Okay, thanks Tom.......I'll have to check it out later as I take the Z to the port in a few hours to ship overseas and was not able to address it last night.

Rob,
Thanks for asking the good question that will help me too.

GTOger · 02-28-2011

Best of luck with the ZR-1 in Japan! I'll wish it a safe journey for you (as I'm sure you will, as well). As I'm driving mine throughout the desert out on the West Coast and feeling like a lonely LT5, I'll be thinking of your car - on a boat! - headed to where they drive on the wrong side of the road and seldom see so many cylinders in a single engine.

HAWAIIZR-1 · 02-28-2011

Quote:

Originally Posted by GTOger

Best of luck with the ZR-1 in Japan! I'll wish it a safe journey for you (as I'm sure you will, as well). As I'm driving mine throughout the desert out on the West Coast and feeling like a lonely LT5, I'll be thinking of your car - on a boat! - headed to where they drive on the wrong side of the road and seldom see so many cylinders in a single engine.

Thanks for your wishes and greatly appreciated. Yeah, I hope it makes the long journey safely and did what I could yesterday to protect paint and wheels with REJEX. Well, they drive on the other side of the road, not the wrong side (we might be on the wrong side). Yes, I'm sure I will drive on the wrong side at some point until I get used to it..........
It will be cool to have American muscle in the area and they have tons of exotics driving around Yokohama, but I did not see many Corvettes or ZR-1s for that matter.

Hammer · 02-28-2011

Craig,

Hope your journey is a good one. Please be sure to keep in touch brother.

John

HAWAIIZR-1 · 03-01-2011

Quote:

Originally Posted by Hammer

Craig,

Hope your journey is a good one. Please be sure to keep in touch brother.

John

Thanks John, I appreciate your thoughts and hoping you will visit for some sushi and beers....no geishas though.

Craig

jrd1990zr1 · 03-02-2011

Craig,

As Tom said three wire in a yellow sheath. Passenger side is under the carpet in a connector to the firewall. Just about under your toes if you had your feet on the firewall carpet. I had one apart about 2 weeks ago, you can't miss it.

Drivers side is similar but it has been three years since I had that connector apart.

Tom's got a super bell button contraption for clearing the codes. Photo is in a different post.

Good luck

tomtom72 · 03-02-2011

http://www.zr1.net/forum/showthread.php?t=13972

Craig, here is the link to the thread that John is talking about.

scottfab · 03-02-2011

Craig, this is just a follow up reminder about what both Hib and I referred to on the ZR1NET list email.
When dealing with those yellow wires/connectors for the sensors, be careful.
While it is not likely to cause the bag to deploy (can ignition off and not rolling) there is still a chance especially since you have an unknown problem.
I suggest following the manual to make the system is safe before working on it.
OR at least make you no one is in the way of an accidental deploy.
Good Luck oh and hey, you need to visit the "Where are the ZR1s at" thread and list yours as in Japan. Oh wait there is not selection for that yet

HAWAIIZR-1 · 03-03-2011

John, Tom and Scott,

Thanks for the info and looking out. I'll take it all in and try to remember so I can troubleshoot this issue once I am back with the Z again. All good info and pointers from all and greatly appreciated.

Yes, there needs to be more than just "Asia" in the where the Z reside. Asia is very huge..................

I know one of the responses is from a buddy I met that frequents here and I am told the Registry will do a Japan location for the club regional areas or at least put an area for it like the European Region. The probem is there might not be enough traffic to justify unless I can spearhead an effort with the ZR-1 owners in Japan that write and understand English.

Aloha,

Craig

02-28-2011	#13
GTOger Join Date: Nov 2010 Location: Dallas, TX Posts: 198	Re: Cannot clear SIR lights (seat belt and INFL REST) Best of luck with the ZR-1 in Japan! I'll wish it a safe journey for you (as I'm sure you will, as well). As I'm driving mine throughout the desert out on the West Coast and feeling like a lonely LT5, I'll be thinking of your car - on a boat! - headed to where they drive on the wrong side of the road and seldom see so many cylinders in a single engine. __________________ [B]1990 Corvette ZR-1 (#1930) Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B] Other Rides: 1992 Pontiac Firehawk (#010), 1967 Pontiac GTO 1998 Porsche 968, 2000 Harley Davidson FXST 1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe

02-28-2011	#15
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Re: Cannot clear SIR lights (seat belt and INFL REST) Craig, Hope your journey is a good one. Please be sure to keep in touch brother. John __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

03-02-2011	#17
jrd1990zr1 Join Date: Dec 2005 Location: Delanson, NY Posts: 909	Re: Cannot clear SIR lights (seat belt and INFL REST) Craig, As Tom said three wire in a yellow sheath. Passenger side is under the carpet in a connector to the firewall. Just about under your toes if you had your feet on the firewall carpet. I had one apart about 2 weeks ago, you can't miss it. Drivers side is similar but it has been three years since I had that connector apart. Tom's got a super bell button contraption for clearing the codes. Photo is in a different post. Good luck __________________ 1968 convertible Lemans Blue, 1986 coupe Medium Blue NCRS Top Flight (sold), 1990 ZR1 #2529 Red NCRS Regional and National Top Flight (sold), 1990 ZR1 #2124 Charcoal Metallic NCRS Top Flight 2010 & 2018, 2003 Anniversary Red Convertible (sold)

03-02-2011	#18
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Cannot clear SIR lights (seat belt and INFL REST) http://www.zr1.net/forum/showthread.php?t=13972 Craig, here is the link to the thread that John is talking about. __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

03-02-2011	#19
scottfab Join Date: Jan 2009 Location: Portland Oregon metro area (Washington side) Posts: 3,207	Re: Cannot clear SIR lights (seat belt and INFL REST) Craig, this is just a follow up reminder about what both Hib and I referred to on the ZR1NET list email. When dealing with those yellow wires/connectors for the sensors, be careful. While it is not likely to cause the bag to deploy (can ignition off and not rolling) there is still a chance especially since you have an unknown problem. I suggest following the manual to make the system is safe before working on it. OR at least make you no one is in the way of an accidental deploy. Good Luck oh and hey, you need to visit the "Where are the ZR1s at" thread and list yours as in Japan. Oh wait there is not selection for that yet __________________ Scott Vett owner since 1979._It's about the car and the people

03-03-2011	#20
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,556	Re: Cannot clear SIR lights (seat belt and INFL REST) John, Tom and Scott, Thanks for the info and looking out. I'll take it all in and try to remember so I can troubleshoot this issue once I am back with the Z again. All good info and pointers from all and greatly appreciated. Yes, there needs to be more than just "Asia" in the where the Z reside. Asia is very huge.................. I know one of the responses is from a buddy I met that frequents here and I am told the Registry will do a Japan location for the club regional areas or at least put an area for it like the European Region. The probem is there might not be enough traffic to justify unless I can spearhead an effort with the ZR-1 owners in Japan that write and understand English. Aloha, Craig __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048