|
07-15-2020
|
#21 |
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: alluminum flywheel?
As has been mentioned a light weight aluminum flywheel may or may not cause transmission rattle, but likely will. Mine has moderate to loud rattle. One thing that can be done to mitigate the rattle is a countershaft shim kit that is very easy to install with the trans out of the car. Carolina Clutch provides such a Kit. It will be my next winter project.
H  https://www.carolinaclutch.com/produ...te-c4-shim-kit
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
07-15-2020
|
#22 |
  
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,445
|
Re: alluminum flywheel?
Thanks, Hans! I never heard of this shim kit,
or that this might help with the rattle. Anybody have any experience with the kit? Does it help? Ted
__________________
1995 ZR-1 #106 Blk/ Blk Owned by me since 2000. 91K miles, but not on motor :-) Mods the way I want it, Not afraid to drive it! |
|
|
|
|
07-15-2020
|
#23 | |
|
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: alluminum flywheel?
Quote:
This is the exact same thing Bill B does when he rebuilds a trans and sets it up for an aluminum flywheel to minimize rattle. H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
|
07-15-2020
|
#24 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: alluminum flywheel?
This may not be apples to apples comparison.. but I had an 89 mini ram car before the ZR-1. It had a centerforce steel single mass flywheel, weighed close to the dual mass, car was fun to drive. I installed a fidanza aluminum one. I hated driving the car after that. Was more of a chore than fun to drive on the street. My 1990 ZR-1 has exhaust, headers and 4.10s with stock flywheel. I love driving it. Since you are having the work done I agree with Ted and Zman, port and chip it.
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
07-16-2020
|
#25 | |
|
Join Date: Jun 2005
Location: CenCoast California
Posts: 899
|
Re: alluminum flywheel?
Quote:
Sorry. If I had to do that again, I'd just use the MSDs.
__________________
Hib Halverson Technical Writer former owner 95 VIN 0140 current owner 19 VIN 1878 |
|
|
|
|
|
07-17-2020
|
#26 | |
Join Date: May 2013
Location: Chicago
Posts: 977
|
Re: alluminum flywheel?
Quote:
Should be here soon! The coil's on my car are the one's that came with it and I want a hotter ignition system and a wider gap on my plugs.
__________________
1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black *Sold* 1985 L98 Blue On Blue *Sold* Last edited by Karl; 07-17-2020 at 02:25 PM. |
|
|
|
|
|
07-23-2020
|
#27 | |
|
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,445
|
Re: alluminum flywheel?
Quote:
He may sell them directly. http://www.zfdoc.com/ Just Sayin' T
__________________
1995 ZR-1 #106 Blk/ Blk Owned by me since 2000. 91K miles, but not on motor :-) Mods the way I want it, Not afraid to drive it! |
|
|
|
|
 |
|
|
Linear Mode
