03-03-2018 | #1 |
Join Date: Aug 2017
Location: merritt island fl
Posts: 25
|
Wiper Blade Position
Anyone have a picture of the windshield wiper blades in the parked position?
|
03-03-2018 | #2 |
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,279
|
Re: Wiper Blade Position
No, but one if them doesn't park below the hood line. Why is that? All this engineering, and Chevrolet can't get both of them to park below the hood.
|
03-03-2018 | #3 | |
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,013
|
Re: Wiper Blade Position
Quote:
They are on my car. Last edited by BigJohn; 03-04-2018 at 01:31 PM. |
|
03-03-2018 | #4 |
Join Date: Oct 2004
Posts: 1,889
|
Re: Wiper Blade Position
Year actually matters in the general appearance of the blades arm. This link has a reasonably good snapshot of through '94 then the '95+. Parking can be tweaked a bit more than displayed in the thread 'if' parts are in very good condition. The same car was used to display both and I'd guess the transmissions, links and sockets were worn and not 'tweaked' for prime park.
**parts = transmissions, links and sockets to crank arm. http://corvette.stealing-fire.com/wiper_arms.htm This would be maybe 'ideal' for a '95 late wiper arms.jpg |
03-03-2018 | #5 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,049
|
Re: Wiper Blade Position
|
03-03-2018 | #6 | |
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,566
|
Re: Wiper Blade Position
Quote:
If the latter, park position is critical as it determines position at full sweep in relation to the windshield molding, which is checked during ops judging. Marty |
|
03-03-2018 | #7 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,049
|
Re: Wiper Blade Position
I have found that the wiper will travel past the molding with the wipers on the high position,I keep a roll of electrical tape in the car just in case I have to cover the molding to keep it from getting damaged from the wiper.
|
03-04-2018 | #8 |
Join Date: Feb 2011
Location: Clayton, North Carolina
Posts: 1,133
|
Re: Wiper Blade Position
__________________
Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR] |
03-04-2018 | #9 | |
Join Date: Aug 2017
Location: merritt island fl
Posts: 25
|
Re: Wiper Blade Position
Quote:
|
|
03-04-2018 | #10 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Wiper Blade Position
On my 90 I had to fuss with the placement of the wiper arms to the splined (stud) a bit. And, the wipers have to be low profile. And, the "parking rest" needed a little tweaking, as I recall.
Here is a list from my parts docs that I've tried (except the 95's)
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry Last edited by Paul Workman; 03-04-2018 at 09:15 AM. |
|
|