NEW Fuel Pressure Regulator coming very soon! - ZR-1 Net Registry Forums

A26B · 05-20-2020

We are pretty excited about this and couldn't wait until everything was ready to ship before spilling the beans.

Jerrys Gaskets has developed a brand new, direct replacement, Fuel Pressure Regulator for the LT5. It is based on the Lingenfelter and Wasinger modifications to the original regulator.

Instead of trying to utilize the original regulator body and deal with core exchanges and small run delays, we chose to make the "body" all new, from billet aluminum. It will utilize the proven 3.5bar/350kPa regulator. We will also have available, 4.0bar/400kPa regulators. Regulators will come with Viton o-ring seals and nitrile diaphram for compatibility with ethanol blended gasoline fuel.

Each Fuel Pressure Regulator will come fully assembled, with a complete set of Viton o-ring seals for the fuel rail/regulator piping and fuel feed & return block.

We hope you like it!

Pre-anodized regulator body, inside view

Anodized regulator assembly

secondchance · 05-20-2020

this is very cool!
It's people like you and Wasinger and stuff like this that allows me to be excited about our ZR-1s despite the fact that I have been driving these cars since 1991 - 29 years!

Thanks Jerry & Phil!

lfalzarano · 05-20-2020

That is a fantastic job!

Sent from my iPhone using ZR-1 Net Registry

Ccmano · 05-20-2020

We, the ZR-1 community, are so lucky to someone like you Jerry!

Thank you so much for your support that goes above and beyond.
H

PhillipsLT5 · 05-20-2020

Another GREAT job! Think about how many of these cars would not be running without Jerry & the rest of the ZR-1 community

conesare2seconds · 05-20-2020

Thanks!

BlackZR1 · 05-20-2020

Thanks Jerry and Phil.
Chamfers all over give it a pro appearance.

Jitse · 05-21-2020

Nice , I am going to put it on my list for the next order!

DRM500RUBYZR-1 · 05-21-2020

Well Done!!!
Your efforts are very much appreciated.
The result; Fantastic!
Thank you!

Marty

A26B · 05-21-2020

I had help along the way....
Phil Wasinger- instigator extraordinaire
Graham Behan-Lingenfelter original specs
Corey Henderson- engineering, CAD, CNC, testing & awesomeness
Keeping the ZR-1 alive and well has always been a group effort. It’s an amazing group of special people.

Sent from my iPhone using ZR-1 Net Registry

05-20-2020	#1
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,373	NEW Fuel Pressure Regulator coming very soon! We are pretty excited about this and couldn't wait until everything was ready to ship before spilling the beans. Jerrys Gaskets has developed a brand new, direct replacement, Fuel Pressure Regulator for the LT5. It is based on the Lingenfelter and Wasinger modifications to the original regulator. Instead of trying to utilize the original regulator body and deal with core exchanges and small run delays, we chose to make the "body" all new, from billet aluminum. It will utilize the proven 3.5bar/350kPa regulator. We will also have available, 4.0bar/400kPa regulators. Regulators will come with Viton o-ring seals and nitrile diaphram for compatibility with ethanol blended gasoline fuel. Each Fuel Pressure Regulator will come fully assembled, with a complete set of Viton o-ring seals for the fuel rail/regulator piping and fuel feed & return block. We hope you like it! Pre-anodized regulator body, inside view Anodized regulator assembly __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

05-20-2020	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,704	Re: NEW Fuel Pressure Regulator coming very soon! this is very cool! It's people like you and Wasinger and stuff like this that allows me to be excited about our ZR-1s despite the fact that I have been driving these cars since 1991 - 29 years! Thanks Jerry & Phil!

05-20-2020	#3
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: NEW Fuel Pressure Regulator coming very soon! That is a fantastic job! Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

05-20-2020	#4
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: NEW Fuel Pressure Regulator coming very soon! We, the ZR-1 community, are so lucky to someone like you Jerry! Thank you so much for your support that goes above and beyond. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

05-20-2020	#5
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,450	Re: NEW Fuel Pressure Regulator coming very soon! Another GREAT job! Think about how many of these cars would not be running without Jerry & the rest of the ZR-1 community

05-20-2020	#6
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 477	Re: NEW Fuel Pressure Regulator coming very soon! Thanks!

05-20-2020	#7
BlackZR1 Join Date: Aug 2015 Location: Pittsburgh, PA Posts: 151	Re: NEW Fuel Pressure Regulator coming very soon! Thanks Jerry and Phil. Chamfers all over give it a pro appearance. __________________ Roger 1990 ZR-1 #2699 Black on Black 15,000 miles Full-time secondaries, 4.10 gears, C-beam plates, ported top end

05-21-2020	#8
Jitse Join Date: Aug 2013 Location: Holland Posts: 80	Re: NEW Fuel Pressure Regulator coming very soon! Nice , I am going to put it on my list for the next order!

05-21-2020	#9
DRM500RUBYZR-1 Join Date: Sep 2008 Location: Mullica Hill, New Jersey Posts: 2,566	Re: NEW Fuel Pressure Regulator coming very soon! Well Done!!! Your efforts are very much appreciated. The result; Fantastic! Thank you! Marty