|
05-06-2010
|
#1 |
|
Join Date: Aug 2005
Location: Fishers, IN
Posts: 775
|
FS: 8 custom CP pistons 4.125 bore
I have a set of CP Pistons for 4.125 bore. These came without valve reliefs, so I had to order a second set for my motor. These are the "X-forging" very lightweight design. They would work great with a 4.000 stroke and 6.000 rods. CH=1.025. These are almost $700 wholesale/$1k retail. No pins or rings.
>> PRICE REDUCED << $400.   
Last edited by tpepmeie; 10-19-2014 at 06:53 PM. Reason: price change |
|
|
|
05-07-2010
|
#2 |
 
Join Date: Jan 2009
Location: Mandeville, LA
Posts: 340
|
Re: FS: 8 custom CP pistons 4.125 bore
Todd,
I might be interested. Can you provide specs on the dish volume and ring sizes? |
|
|
|
|
05-08-2010
|
#3 | |
|
Join Date: Aug 2005
Location: Fishers, IN
Posts: 775
|
Re: FS: 8 custom CP pistons 4.125 bore
Quote:
|
|
|
|
|
|
11-30-2013
|
#4 |
|
Join Date: Aug 2005
Location: Fishers, IN
Posts: 775
|
Re: FS: 8 custom CP pistons 4.125 bore
TTT. These need to go to a new home. Surely somebody in the FBI crew is thinking about a AES big-bore motor. These are perfect for it.
|
|
|
|
|
11-30-2013
|
#5 |
|
Join Date: Mar 2010
Location: Fort Worth, TX
Posts: 396
|
Re: FS: 8 custom CP pistons 4.125 bore
same price?
|
|
|
|
|
11-30-2013
|
#6 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,661
|
Re: FS: 8 custom CP pistons 4.125 bore
Any other configurations besides a 415?
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
11-30-2013
|
#7 |
 Join Date: May 2011
Location: Sydney, Australia
Posts: 2,479
|
Re: FS: 8 custom CP pistons 4.125 bore
409 with 3.82 regrind.
__________________
Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car |
|
|
|
|
11-30-2013
|
#8 |
|
Join Date: Aug 2005
Location: Fishers, IN
Posts: 775
|
Re: FS: 8 custom CP pistons 4.125 bore
So, lots of guys asking about compatibility. These are 1.025" compression height.
figure the stock deck height is 9.025" (stroke /2) + Rod length + 1.025" = 9.025 I use these with a 4" stroke and 6" rods, so (4/2) +6 + 1.025 = 9.025 You could figure out other combinations. |
|
|
|
|
11-30-2013
|
#9 |
|
Join Date: Aug 2005
Location: Fishers, IN
Posts: 775
|
Re: FS: 8 custom CP pistons 4.125 bore
could also do a 3.75" offset ground crank, with 6.125" rods.
|
|
|
|
|
12-01-2013
|
#10 |
|
Join Date: Aug 2005
Location: Fishers, IN
Posts: 775
|
Re: FS: 8 custom CP pistons 4.125 bore
Price reduced to $500. These need to go, or I might have to build a big bore 401
|
|
|
|
 |
|
|
Linear Mode
