cam cover ???? - ZR-1 Net Registry Forums

jonszr1 · 05-24-2010

the spark plug o rings on the passenger side cam covers have started leaking. is there something that might have caused this, a vibration?or something else . i have owned the 92 for 3 years and have never taken them off . thanx to rick for guiding me on its removal. also is there anything to ck while its off ????

Locobob · 05-24-2010

Did you check the bolts for tightness? I have run across a few that have some how backed out on their own.

jonszr1 · 05-25-2010

no i havenbt . i had to get an inch pound tq wrench ,which i did today. i have new o rings and got some 518 locktight so i figured i would pull it off and put new o rings on the spark plug tubes . is there anything i should take a look at while i have it off ???

tomtom72 · 05-25-2010

Brad, two things you may want to look at while you're under there.

The chain guide strips in the cam cover, and there is a breather filter where the aluminum tube comes from that maybe falling apart.

Tom

jonszr1 · 05-26-2010

tom thankyou for the heads up on the timing chain wear strips. . will be kina fun ckin out what it looks like in person under there as i have never seen that first hand

tomtom72 · 05-26-2010

Quote:

Originally Posted by jonszr1

tom thankyou for the heads up on the timing chain wear strips. . will be kina fun ckin out what it looks like in person under there as i have never seen that first hand

Brad. I never seen any of that stuff first hand either!

I would be interested in hearing your thoughts after you get your eyes on this stuff.

05-24-2010	#1
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	cam cover ???? the spark plug o rings on the passenger side cam covers have started leaking. is there something that might have caused this, a vibration?or something else . i have owned the 92 for 3 years and have never taken them off . thanx to rick for guiding me on its removal. also is there anything to ck while its off ????

05-24-2010	#2
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,057	Re: cam cover ???? Did you check the bolts for tightness? I have run across a few that have some how backed out on their own. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368

05-25-2010	#3
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: cam cover ???? no i havenbt . i had to get an inch pound tq wrench ,which i did today. i have new o rings and got some 518 locktight so i figured i would pull it off and put new o rings on the spark plug tubes . is there anything i should take a look at while i have it off ???

05-25-2010	#4
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: cam cover ???? Brad, two things you may want to look at while you're under there. The chain guide strips in the cam cover, and there is a breather filter where the aluminum tube comes from that maybe falling apart. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

05-26-2010	#5
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: cam cover ???? tom thankyou for the heads up on the timing chain wear strips. . will be kina fun ckin out what it looks like in person under there as i have never seen that first hand