Which oil filter do you use? - Page 2 - ZR-1 Net Registry Forums

BBBAD94ZR1 · 11-28-2006

Jeff,
It was the new black ones, I purchased them around 2 months ago.
Ray

BBBAD94ZR1 · 11-28-2006

As Bosch being made by Champion I was unaware. I found a case of old filters from 4 years ago. My uncle owns a shop and had them in a warehouse. All I kwow is what I seen. When I had the filters that came with the car when I purchased it where old mobile ones painted black. The new ones seemed to be the issue.
Thanks for reading.
Ray

Z Factor · 11-28-2006

Quote:

Originally Posted by BBBAD94ZR1

Thanks for reading.
Ray

That is what we are here for, to help each other out.

tomtom72 · 12-01-2006

I switched to the Bosch after I started having trouble with the new black M1 filters. I had been using the old grey ones & I had good readings on the gauge and very slight chain rattle upon cold start up. On warm or hot restarts there was almost no chain rattle.

My first oil change for the start of the summer the A/Z by me had the new black M1's so that's what I bought. Major chain rattle on cold start up, minor rattle on warm/hot restarts and an alarmingly long time to have O/Pres show up on the gauge. I was very concerned that my O/Pump was quitting on me. I bought another black M1 & tried it and had the same results....now I was scared!

Came home(here to our home) and looked around & read the newsletter at the netreg site and decided that I was having some bad luck with the new black M1's. I was going to order another O/P sending unit but buying a Bosch O/F was quicker. All I can say is using the Bosch instead of the black M1 my "noises" at cold start & warm/hot restarts are back to what they used to be when I was using the grey M1's. Quick rise of O/P @ start up on the gauge and very little chain rattle @ cold start. My 90 always had about 3 seconds of chain rattle at cold start as I doubt the original owner ever complained enough while under warr for the dealer to replace the right side guide? Anyway, it always had about 3 seconds of rattle after sitting a week. Warm &/or hot restarts had practically no rattle and the O/P gauge always showed a quick (you almost didn't notice a wait for O/P) build to operating oil pressure.

I guess the A/Z where I buy M1's got a bad batch??? The grey ones worked fine, it's the black ones I had bad luck with so now it's Bosch for my Z! I know that this is unscientific but the nosies & time to build O/P were giving me nightmares!

Tom

Hib Halverson · 12-27-2006

Quote:

Originally Posted by BBBAD94ZR1

Was using Mobile, actually purchased a case of them If anyone wants to buy them I'll sell them cheap.
Ray

How much you want for the case of filters?

bobbyhi · 12-27-2006

I have been using the Bosch and no chain rattle....

Hib - good to hear from you on the forum. Wish you were here more. You have a lot to contribute.

90ZR1 · 01-07-2007

wow... so many mobil 1's.... maybe ill try and switch, see if she feels better!

Hib Halverson · 01-07-2007

Quote:

Originally Posted by bobbyhi

Hib - good to hear from you on the forum. Wish you were here more. You have a lot to contribute.

Thank you, Bob.
I wish I could get here more often, too. I'm going to try better on that in 07.

DaveK · 01-07-2007

Has anyone ever tried the re-usable ones like the Pure Power one?

http://www.gopurepower.com/site/prod...lt.asp#FILTERS

Just curious - they look like a good idea 'on paper' at least and got a pretty good write up in 'Vette' a few months back.

Dave

4DSZR1 · 01-08-2007

I've been using the M1 and a couple months back I went with a Bosch. According to my highly claibrated ear, the Bosch may be a tiny bit better on cold startups after siting a week or so, some minumal rattle. Startups after just a few days are noticably better with no rattle at all.

View Poll Results: Which oil filter do you use?
AC Delco	68	27.42%
Amsoil	1	0.40%
Baldwin	0	0%
Bosch	66	26.61%
Fram	13	5.24%
K&N	12	4.84%
Mobil 1	54	21.77%
Napa	12	4.84%
Penske	0	0%
Pennzoil	1	0.40%
PowerFlo	1	0.40%
ProLine	0	0%
Purolator	3	1.21%
Quaker State	0	0%
STP	0	0%
Wix	17	6.85%
Voters: 248. You may not vote on this poll

11-28-2006	#11
BBBAD94ZR1 Join Date: Nov 2005 Location: NJ Posts: 299	Re: Which oil filter do you use? Jeff, It was the new black ones, I purchased them around 2 months ago. Ray __________________ [FONT=Century Gothic][SIZE=5][COLOR=black][I]:dancing[/I][/COLOR][/SIZE][/FONT]

11-28-2006	#12
BBBAD94ZR1 Join Date: Nov 2005 Location: NJ Posts: 299	Re: Which oil filter do you use? As Bosch being made by Champion I was unaware. I found a case of old filters from 4 years ago. My uncle owns a shop and had them in a warehouse. All I kwow is what I seen. When I had the filters that came with the car when I purchased it where old mobile ones painted black. The new ones seemed to be the issue. Thanks for reading. Ray __________________ [FONT=Century Gothic][SIZE=5][COLOR=black][I]:dancing[/I][/COLOR][/SIZE][/FONT]

12-01-2006	#14
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Which oil filter do you use? I switched to the Bosch after I started having trouble with the new black M1 filters. I had been using the old grey ones & I had good readings on the gauge and very slight chain rattle upon cold start up. On warm or hot restarts there was almost no chain rattle. My first oil change for the start of the summer the A/Z by me had the new black M1's so that's what I bought. Major chain rattle on cold start up, minor rattle on warm/hot restarts and an alarmingly long time to have O/Pres show up on the gauge. I was very concerned that my O/Pump was quitting on me. I bought another black M1 & tried it and had the same results....now I was scared! Came home(here to our home) and looked around & read the newsletter at the netreg site and decided that I was having some bad luck with the new black M1's. I was going to order another O/P sending unit but buying a Bosch O/F was quicker. All I can say is using the Bosch instead of the black M1 my "noises" at cold start & warm/hot restarts are back to what they used to be when I was using the grey M1's. Quick rise of O/P @ start up on the gauge and very little chain rattle @ cold start. My 90 always had about 3 seconds of chain rattle at cold start as I doubt the original owner ever complained enough while under warr for the dealer to replace the right side guide? Anyway, it always had about 3 seconds of rattle after sitting a week. Warm &/or hot restarts had practically no rattle and the O/P gauge always showed a quick (you almost didn't notice a wait for O/P) build to operating oil pressure. I guess the A/Z where I buy M1's got a bad batch??? The grey ones worked fine, it's the black ones I had bad luck with so now it's Bosch for my Z! I know that this is unscientific but the nosies & time to build O/P were giving me nightmares! Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

12-27-2006	#16
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	Re: Which oil filter do you use? I have been using the Bosch and no chain rattle.... Hib - good to hear from you on the forum. Wish you were here more. You have a lot to contribute. __________________ Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19

01-07-2007	#17
90ZR1 Join Date: Oct 2004 Location: Libertyville Posts: 70	Re: Which oil filter do you use? wow... so many mobil 1's.... maybe ill try and switch, see if she feels better! __________________ 1990 Black ZR1 #2910 32k mi. Griff

01-07-2007	#19
DaveK Join Date: Jul 2004 Location: Sudbury, Ontario. Canada Posts: 1,534	Re: Which oil filter do you use? Has anyone ever tried the re-usable ones like the Pure Power one? http://www.gopurepower.com/site/prod...lt.asp#FILTERS Just curious - they look like a good idea 'on paper' at least and got a pretty good write up in 'Vette' a few months back. Dave __________________ 1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff Last edited by DaveK; 01-15-2007 at 12:44 AM.

01-08-2007	#20
4DSZR1 Join Date: Dec 2005 Posts: 692	Re: Which oil filter do you use? I've been using the M1 and a couple months back I went with a Bosch. According to my highly claibrated ear, the Bosch may be a tiny bit better on cold startups after siting a week or so, some minumal rattle. Startups after just a few days are noticably better with no rattle at all.