K & B products ? - ZR-1 Net Registry Forums

8cam · 09-01-2016

That's where I had my ECM rebuilt. The guy is definitely not very sociable but for me at least, it worked. He told me they have about a 2/3 success rate so it's a roll of the dice. If you didn't get charged then you're money ahead but you may have to find a new ECM. He actually send them to an ex corvette engineer who does the rebuild, which is why it takes so long. Lots of times it gets sent off, repair attempted, and it still fails. These things are getting old and fragile so no guarantees. I got lucky but I know a couple others who didn't.

You might ping Russ McBride on this forum. He's got a megasquirt running in his, probably the future for keeping these cars on the road.

09-01-2016	#1
8cam Join Date: Jul 2013 Location: Atlanta Posts: 451	Re: K & B products ? That's where I had my ECM rebuilt. The guy is definitely not very sociable but for me at least, it worked. He told me they have about a 2/3 success rate so it's a roll of the dice. If you didn't get charged then you're money ahead but you may have to find a new ECM. He actually send them to an ex corvette engineer who does the rebuild, which is why it takes so long. Lots of times it gets sent off, repair attempted, and it still fails. These things are getting old and fragile so no guarantees. I got lucky but I know a couple others who didn't. You might ping Russ McBride on this forum. He's got a megasquirt running in his, probably the future for keeping these cars on the road. __________________ Mark '90 ZR-1 #1322 Daily Driver, 64k and counting Black/Gray [IMG]http://i208.photobucket.com/albums/bb49/mlitherland/IMG_0326_zps3d50d8cb.jpg[/IMG]