ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-21-2016   #1
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,669
Default Cooling Question

Ok, last year I installed a Fluidyne rad to keep temps down particularly when in traffic w A/C on. Worked great have however, with ambient temps below 60, it was difficult to maintain operating temps on motor. At cruise, coolant temps would drop into the 150-160 range. Which is not desired if you want Closed Loop operation w Learn Control. So I finally bought a stock therm from Jerry's and had it installed. turns out the thermo coming OUT of the motor had 5 holes drilled in it. The stock thermo was installed w 0 holes.
The result is that coolant temps increase now unless motor is turning above 12-1300 rpm. That includes at highway cruise. So I know I don't need 5 holes in thermo, but I'd like to avoid doing this again. How many holes should I put in stock thermo so that fans can maintain steady operating temps?
I should add that I have under drive pulleys and temps creep up they don't shoot up.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX

Last edited by XfireZ51; 10-21-2016 at 05:06 PM.
XfireZ51 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:16 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020