DRM Bias Spring install - ZR-1 Net Registry Forums

Billy Mild · 03-24-2017

I have this sitting in my basement from over a year ago. I would like to install it this weekend and flush my brakes on the Vette before my first track day of the year. I have read a few posts and it sounds like after install(which is a PITA) the master cylinder needs to be bled along with the rest of the braking system.

Steps:
1. Replace spring
2. Bleed master cylinder
3. Flush brake fluid

Does this all sound correct? How hard is it to remove the spring? Any tips would be greatly appreciated.

03-24-2017	#1
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	DRM Bias Spring install I have this sitting in my basement from over a year ago. I would like to install it this weekend and flush my brakes on the Vette before my first track day of the year. I have read a few posts and it sounds like after install(which is a PITA) the master cylinder needs to be bled along with the rest of the braking system. Steps: 1. Replace spring 2. Bleed master cylinder 3. Flush brake fluid Does this all sound correct? How hard is it to remove the spring? Any tips would be greatly appreciated. __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration