|
09-02-2017 | #1 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
DIY glass top repair?
The corner of Ami's smoked glass top was broken and glued(?) Back on. But, the repair is visible (maybe only to a blind man on a galloping horse...).
I think if there was a filler of some kind, I believe I have the tools to buff it out. Can anyone point me in the right direction? TIA Paul
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
09-02-2017 | #2 |
Join Date: Jan 2011
Location: Dubai, United Arab Emirates
Posts: 449
|
Re: DIY glass top repair?
Paul give this a try. I have used it on T-tops, targa tops and jewelery with good results.
https://www.resinobsession.com/resin...the-difference |
09-03-2017 | #3 |
Join Date: Aug 2005
Location: Iuka, Mississippi 38852
Posts: 756
|
Re: DIY glass top repair?
Thompson Astro Tops
1422 Huntsville Rd Florence, AL 35630 Phone number (256) 764-0659 |
09-03-2017 | #4 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,666
|
Re: DIY glass top repair?
Paul,
There's Melrose T Tops in Cortland.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
09-04-2017 | #5 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,035
|
Re: DIY glass top repair?
Paul, I concur you should just get a new one. I bought a replacement transparent top for my '95 at Melrose. Gave them my old one (it was a replacement in its own right, made out of Lexan, not Polycarbonate, and had cracked). They required it as a trade in because they could reuse the frame (also was a replacement, but an OEM one, with no serial number on it). The one I got from Melrose also had no serial number on it--it is illegal to add or change a serial number. Had a good experience with Melrose and you can just drive to them. And cash gets you a discount--at least it got me one. Can't recall what I paid but it was in the neighborhood of $600-$650 I think. As an added incentive, the owner owns and displays one of the Morrison cars--at least he did when I bought my top in 2013. Melrose Corvette, 100 West Ellwalk Avenue | Cortland, IL 60112 | Phone: 815-758-2783 | Fax: 815-758-2796 --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" Last edited by WARP TEN; 09-04-2017 at 10:15 AM. |
09-03-2017 | #6 | |
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,566
|
Re: DIY glass top repair?
Quote:
ANY repair will still be easily seen by the blind person on the galloping horse, and cheapens the look of the car. Those roof panels are subjected to a lot of torsional force as the car moves over bumps and potholes. Once it is compromised, it is likely to remain that way. Yours can be rebuilt, or best to just use it as a core for return. Melrose or Thompson as others said, both are fine as long as you select the factory replacement version. Like Nike; Just do it. Then enjoy the new top! Marty |
|
09-03-2017 | #7 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,666
|
Re: DIY glass top repair?
U can't unbreak an egg.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
09-03-2017 | #8 |
Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
|
Re: DIY glass top repair?
This is a bit of a tangent, but hopefully related enough ...
If you buy a protective storage cover for your targa top, look closely before ordering. I was very disappointed when I found my new cover left the vulnerable corners exposed. It's easy to set the top down on one of the corners and chip it. The cover doesn't protect them at all (see lower corners in this photo). Also, I agree with Marty. My glass top came with a cracked corner, and I stupidly did a few track days with my car and the top developed more cracks. I shouldv'e swapped to my other top for those days. My cracks are hidden (not very well) with black vinyl (like the decal material). It looks okay from 15' away. |
09-03-2017 | #9 |
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,594
|
Re: DIY glass top repair?
The corners of the storage bag are left
"exposed" to allow it to fit in the fixtures in the rear storage compartment |
09-04-2017 | #10 |
Join Date: Nov 2013
Location: Wilkes-Barre, PA
Posts: 148
|
Re: DIY glass top repair?
I'd be curious too. Mine has a 1" crack on the front drivers corner. Along time ago I had a 95 I bought a Astro top for, was a big piece of crap compared to the original. Melrose has some good reviews but never looked at one up close.
__________________
1994 ZR-1 #198, sold [img]https://live.staticflickr.com/65535/48400173802_2a6f122cfb_n.jpg[/IMG] [COLOR=RoyalBlue]96 GrandSport#857[/COLOR],[COLOR=Red]Red Gut[/COLOR] 397 LT4, AFR heads,3:90 gears, DRM longtubes, Sepanek 700R4, Yank 3600, bla-bla... Best ET w/396 & 6-speed 11.02 @126.57 w/1.60 60' Best ET w/396 & 700r4 10.82 @124.87 w/1.48 60' 2003 DarkShadowGray Ford Lightning 460rwhp/550rwtq 12.11 @112.18 w/1.71 60' |
|
|