|
09-04-2020
|
#1 |
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,469
|
Fusible Link Wire
Can someone verify for me the fusible link wire gauge I need to the primary and secondary cooling fans. Battery acid got the best mine and the wire is mush. I read a thread that said 20 gauge, I just want to be sure.
Thanks Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
09-04-2020
|
#2 |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,704
|
Re: Fusible Link Wire
Someone might be able to tell you exactly but rule of thumb is fusible link is 4 ga. smaller than the wire protecting. If wire to fan circuit is 14 ga. fusible link would be 18. I think the length needs to be matched to OEM length also.
|
|
|
|
|
09-04-2020
|
#3 |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,704
|
Re: Fusible Link Wire
http://www.zr1.net/forum/showthread.php?t=17631
What you are seeing may not be battery acid damage but actually a fusible link having done its job. You might have a bad fan. |
|
|
|
 |
|
|
Linear Mode
