ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1s and ZR-1 Parts For Sale/Wanted

Reply
 
Thread Tools Display Modes
Old 02-19-2014   #1
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
Default WTB 90'-95' ZR-1 sans engine, trans

WTB 90'-95' ZR-1 without engine, transmission, drive shaft.

Do not need stock exhaust, radiator, air intake, front wheel brakes, oil cooler lines (and as stated Do Not need Engine or Transmission).

Prefer RED exterior.
Prefer beige/tan interior.

Blown engine/transmission fine.

Just in case you do not have the time or cannot fix what is wrong

More fun modifying and driving when gas was less than 30 cents a gallon



What was the Blue Base STANDARD Pump as compared to Red Base STANDARD Pump?


Last edited by Dynomite; 02-19-2014 at 11:57 AM.
Dynomite is offline   Reply With Quote
Old 02-19-2014   #2
bradley
 
Join Date: Aug 2013
Location: ridgecrest ca
Posts: 104
Default Re: WTB 90'-95' ZR-1 sans engine, trans

dubt it is what you want but I do have my 90 that could be done that way .engine has a blown head gasket . car has a lot of mile on it but as it sits has corey henderon inj housing and plenum porting jeal headers, bill boudreaus bluprinted tranny 410 gears , fidanza flywheel, corey porting . have dyno sheet from when the car was done showing 409.9 rwhp and 373.3 tq. also have a spare motor. exterior is black and interior is red . also has original windshield .
bradley is offline   Reply With Quote
Old 02-19-2014   #3
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
Default Re: WTB 90'-95' ZR-1 sans engine, trans

Quote:
Originally Posted by bradley View Post
dubt it is what you want but I do have my 90 that could be done that way .engine has a blown head gasket . car has a lot of mile on it but as it sits has corey henderon inj housing and plenum porting jeal headers, bill boudreaus bluprinted tranny 410 gears , fidanza flywheel, corey porting . have dyno sheet from when the car was done showing 409.9 rwhp and 373.3 tq. also have a spare motor. exterior is black and interior is red . also has original windshield .
A bit too much done on the engine but actually pretty easy to fix. I like modifying myself.
You have to pull the engine to replace head gasket which is over half the job but if you have headers.....just leave headers installed (stock exhaust another deal all together)

With a spare engine like I have....do what I am thinking.....find a spare car to put it in. But I also have spare everything else including spare transmission with only 25K miles (actually 2 spares the other with 50K miles which will go to zfdoc when I am ATVing near AZ). New transmission (in the crate) went into my 91'. I am looking for a nice original ZR1 for my 95' crate engine

Just have to plug EGR on that 95' engine

NO.....do not say it......(I know what you are thinking about installing a crate engine).
I prefer to run them rather than look at them and can fix anything that breaks....so why not use/install my spare engine rather than just look at it (even if it is in the crate)

Last edited by Dynomite; 02-19-2014 at 11:33 AM.
Dynomite is offline   Reply With Quote
Old 02-19-2014   #4
Hog
 
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
Default Re: WTB 90'-95' ZR-1 sans engine, trans

Yes Sir, run them like they were designed to be ran. No sense in saving them for the next owners.
__________________
peace
Paul

ZR-1 Net Registry Member #1494
Hog is offline   Reply With Quote
Old 02-19-2014   #5
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
Default Re: WTB 90'-95' ZR-1 sans engine, trans

Quote:
Originally Posted by Hog View Post
Yes Sir, run them like they were designed to be ran. No sense in saving them for the next owners.
Yep....Much rather run that extremely nice crate engine


Dynomite is offline   Reply With Quote
Old 02-19-2014   #6
Y-me
 
Join Date: Jul 2011
Location: Ft Myers Fl
Posts: 224
Default Re: WTB 90'-95' ZR-1 sans engine, trans

You are a month too late for the one I had.
Y-me is offline   Reply With Quote
Old 02-19-2014   #7
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
Default Re: WTB 90'-95' ZR-1 sans engine, trans

Quote:
Originally Posted by Y-me View Post
You are a month too late for the one I had.
Ha. Was that 40% discount? Lol
Dynomite is offline   Reply With Quote
Old 02-19-2014   #8
bradley
 
Join Date: Aug 2013
Location: ridgecrest ca
Posts: 104
Default Re: WTB 90'-95' ZR-1 sans engine, trans

the problem is I cant find any time to do that plus having to take a 700 a month cut in pay at work has made thing squeaky at best .
bradley is offline   Reply With Quote
Old 02-19-2014   #9
Y-me
 
Join Date: Jul 2011
Location: Ft Myers Fl
Posts: 224
Default Re: WTB 90'-95' ZR-1 sans engine, trans

Well you got some of it for 40% off
Y-me is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020