**ZR-1 Front Plates** - ZR-1 Net Registry Forums

BiZ · 02-20-2006

Greetings all,

As some of you know I made some plates for the front bumper of the ZR-1s a couple of years ago. These plates replaced the fatory "CORVETTE" plates with "ZR-1". I have since stopped making them. But due to the recent interest in them I have decided to run another batch of plates. I posted this information over on the CorvetteForum a couple of moths ago. The Forum Moderators and Administrators decided that they were not going to allow me to sell them on the CorvetteForum. They want me to become a supporting vendor on there and pay them to sell the plates on there. Which I can understand from their standpoint, but I am not in the business of making these things fulltime. My day job is in management. I am the Plant Manager of a production facility in Florida. This job takes up quite a bit of my time. Usually 6 days a week. I cannot afford to become a vendor and pay them a monthly fee for something I will only make a limited amount of. These plates were something I came up with when I owned my ZR-1.

So now before I even start to post details about the plates here I want to make sure that I have permission to do so. If any Moderator or Site Administrator has any issues with me doing this please let me know before I go any further. I had to purchase new molding material as the original molds are pretty much shot. I have a list of people who showed interest when I posted this information on the CorvetteForum. I will make new molds and begin production in the near future. I will post the details on how to order as soon as I get the ok from the powers that be, here on the ZR-1 Registry Forum.

Have a good day,
Jason

Z Factor · 02-20-2006

Hello and welcome to the forum Jason.

It is about time you registered over here, even though you don't have a ZR-1 any longer & now own a Found On the Road Dead.

As you probably recall, I have suggested you continue to make these since occasionally we have members looking to buy them. I see no problem with you taking orders for a limited production of plates for our members. Since you cannot promote it on CF, link our site to those who are interested and ask them to sign up over here if they have not already done so.

Kevin · 02-20-2006

Am I still on the list from CF?

If not
1 for a 90

02-20-2006

Jason, you should be able to as the plates as they used to be sold through this organization.

Zr1 Destroyer · 02-20-2006

Jason, count me in for the Zr1 front plate when and if ya decide to make another batch!!!=D>

TommyL · 02-20-2006

I will take one as well for the 91-95 MYs.

Aurora40 · 02-20-2006

If this is the "put me down" thread, then put me down for one 1990 style!

RICKYRJ1 · 02-21-2006

I'll take 1 black and 1 admiral blue, Thanks

1990 quasar blue · 02-21-2006

Biz, ready when you are.

RICHARD TILL · 02-21-2006

i might like one. something to make the front end look a little more distinctive. can post pictures?

02-20-2006	#1
BiZ Join Date: Feb 2006 Posts: 33	ZR-1 Front Plates Greetings all, As some of you know I made some plates for the front bumper of the ZR-1s a couple of years ago. These plates replaced the fatory "CORVETTE" plates with "ZR-1". I have since stopped making them. But due to the recent interest in them I have decided to run another batch of plates. I posted this information over on the CorvetteForum a couple of moths ago. The Forum Moderators and Administrators decided that they were not going to allow me to sell them on the CorvetteForum. They want me to become a supporting vendor on there and pay them to sell the plates on there. Which I can understand from their standpoint, but I am not in the business of making these things fulltime. My day job is in management. I am the Plant Manager of a production facility in Florida. This job takes up quite a bit of my time. Usually 6 days a week. I cannot afford to become a vendor and pay them a monthly fee for something I will only make a limited amount of. These plates were something I came up with when I owned my ZR-1. So now before I even start to post details about the plates here I want to make sure that I have permission to do so. If any Moderator or Site Administrator has any issues with me doing this please let me know before I go any further. I had to purchase new molding material as the original molds are pretty much shot. I have a list of people who showed interest when I posted this information on the CorvetteForum. I will make new molds and begin production in the near future. I will post the details on how to order as soon as I get the ok from the powers that be, here on the ZR-1 Registry Forum. Have a good day, Jason

02-20-2006	#2
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,667	Re: ZR-1 Front Plates Hello and welcome to the forum Jason. It is about time you registered over here, even though you don't have a ZR-1 any longer & now own a Found On the Road Dead. As you probably recall, I have suggested you continue to make these since occasionally we have members looking to buy them. I see no problem with you taking orders for a limited production of plates for our members. Since you cannot promote it on CF, link our site to those who are interested and ask them to sign up over here if they have not already done so.

02-20-2006	#3
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,633	Re: ZR-1 Front Plates Am I still on the list from CF? If not 1 for a 90 __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

02-20-2006	#4
Jeffvette Guest Posts: n/a	Re: ZR-1 Front Plates Jason, you should be able to as the plates as they used to be sold through this organization.

02-20-2006	#5
Zr1 Destroyer Join Date: Oct 2005 Location: Candy Apple...yUmMy Posts: 1,137	Re: ZR-1 Front Plates Jason, count me in for the Zr1 front plate when and if ya decide to make another batch!!!=D> __________________ [IMG]http://i43.photobucket.com/albums/e396/ry368/Zr1launch/Goodfellas-1.gif[/IMG] Here, let me help you with your Vette...lol! [B]1991 QuAsAr BlUe Zr1 w/415 1967 Nova w/Sb2 power!!! 1991 GMC Syclone [/B][FONT=Century Gothic][COLOR=blue] [/COLOR][/FONT]

02-20-2006	#6
TommyL Join Date: Sep 2005 Location: Ontario, Canada Posts: 204	Re: ZR-1 Front Plates I will take one as well for the 91-95 MYs.

02-20-2006	#7
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: ZR-1 Front Plates If this is the "put me down" thread, then put me down for one 1990 style! __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

02-21-2006	#8
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,177	Re: ZR-1 Front Plates I'll take 1 black and 1 admiral blue, Thanks

02-21-2006	#9
1990 quasar blue Join Date: Feb 2004 Location: Ma Posts: 404	Re: ZR-1 Front Plates Biz, ready when you are. __________________ 1990 ZR1 #2574 Medium Quasar Blue Metallic 1 of 19

02-21-2006	#10
RICHARD TILL Join Date: Aug 2005 Location: Iuka, Mississippi 38852 Posts: 756	Re: ZR-1 Front Plates i might like one. something to make the front end look a little more distinctive. can post pictures?