03-30-2019 | #1 |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Trans Seal
Since Im getting a new exhaust system, thought Id fix the leaky rear seal on the ZF. Anything else I should do at this point? I see what looks like sealer under the lip of the seal.. should I use something for the new one in that location also?
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
03-30-2019 | #2 |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Trans Seal
If you don’t already have one, now would be the time to do a Hurst or ZFDoc shifter. I wouldn’t own a Z without one. Replace the seal, their cheap.
H
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
03-30-2019 | #3 |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: Trans Seal
Already have Bills short throw shifter.... In fact, my whole transmission has been built by him. Im sort of surprised the rear seal is leaking. No grooves in the yoke either... Not sure why its leaking, but it is.
Anyone have a part number for the seal? Do I put sealer under the lip of the seal??
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
03-30-2019 | #4 |
Join Date: Jun 2018
Location: Owasso, OK
Posts: 6
|
Re: Trans Seal
National P/N 4333N. Sealant not necessary.
|
03-30-2019 | #5 |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: Trans Seal
I was able to get a NAPA seal locally Part # 18992 SKF Brand Made in USA $9.75
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
03-31-2019 | #6 | |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,036
|
Re: Trans Seal
Quote:
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
03-31-2019 | #7 | |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: Trans Seal
Quote:
A couple of things,,, the yoke is pretty much brand new, the P.O. replaced it. It looks perfect, no grooves, nothing at all, mirror finish. The leak wasnt terrible... a drop on the garage floor after sitting for a month or more... Im on the O.C.D. side when it comes to my cars leaking... I HATE it!! So, being a pretty simple job and very inexpensive.... why not? Plus... cant have a 10 dollar seal dripping onto a 1000 dollar exhaust system now can I??
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
03-31-2019 | #8 |
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,373
|
Re: Trans Seal
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
04-01-2019 | #9 | |
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
|
Re: Trans Seal
Quote:
I got the seal installed no problem.... Should be fine.
__________________
[B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B] |
|
|
|