DRM coil over install. - ZR-1 Net Registry Forums

cvette98pacecar · 08-05-2014

I reserved the first ten post for step by step instructions.

cvette98pacecar · 08-05-2014

Reserved 2.

cvette98pacecar · 08-05-2014

Reserved 3.

cvette98pacecar · 08-05-2014

Reserved 4.

cvette98pacecar · 08-05-2014

Reserved 5.

cvette98pacecar · 08-05-2014

Reserved 6.

Jitse · 08-06-2014

I will start soon with my DRM coil-over, swaybars, and Banski rear suspension upgrade too. Looking forward to see your reports :-) and if there is interest I add some pictures here from the progress.

BennieC. · 09-27-2014

This is also in my wish list. Waiting for Randy @ DRM to get back with me.

Jitse · 10-07-2014

Last week, I started with the upgrade.
Everything is now dismantled and cleaned, I want to make the groove in shock absorber for the snap-ring too keep the sleeve in position. Did somebody know the wall thickness from the Bilstein shock?

I think to go 0.4 mm deep. Any recommendation ?

I like to change the bushings for the front End Control Arm, the energy suspension catalogue item #3.3142 looks correct for it. With a press it's not too big issue to change them.....

Later on some pictures from my progress.

08-05-2014	#1
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	DRM coil over install. I reserved the first ten post for step by step instructions. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car Last edited by cvette98pacecar; 08-05-2014 at 10:36 AM.

08-05-2014	#2
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 2. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-05-2014	#4
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 4. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-05-2014	#5
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 5. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-05-2014	#6
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: DRM coil over install. Reserved 6. __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

08-06-2014	#7
Jitse Join Date: Aug 2013 Location: Holland Posts: 80	Re: DRM coil over install. I will start soon with my DRM coil-over, swaybars, and Banski rear suspension upgrade too. Looking forward to see your reports :-) and if there is interest I add some pictures here from the progress.

09-27-2014	#8
BennieC. Join Date: Feb 2013 Location: Sacramento Posts: 21	Re: DRM coil over install. This is also in my wish list. Waiting for Randy @ DRM to get back with me.

10-07-2014	#9
Jitse Join Date: Aug 2013 Location: Holland Posts: 80	Re: DRM coil over install. Last week, I started with the upgrade. Everything is now dismantled and cleaned, I want to make the groove in shock absorber for the snap-ring too keep the sleeve in position. Did somebody know the wall thickness from the Bilstein shock? I think to go 0.4 mm deep. Any recommendation ? I like to change the bushings for the front End Control Arm, the energy suspension catalogue item #3.3142 looks correct for it. With a press it's not too big issue to change them..... Later on some pictures from my progress.