|
|
|
03-16-2018
|
#1 |
|
Join Date: Jan 2017
Location: US
Posts: 233
|
Intake gasket sets?
Which do you use the 1/32" or 3/32"?
Sent from my XT1585 using Tapatalk |
|
|
|
03-16-2018
|
#2 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,645
|
Re: Intake gasket sets?
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
03-16-2018
|
#3 |
|
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Intake gasket sets?
I suggest you buy a couple of pairs at a time.
I've owned the car for 3 years/5,000 miles and I bought my 4th & 5th pairs wednesday.
__________________
Mazda RX-7 1992 Chevrolet Corvette ZR-1 1991 Dodge Viper RT/10 1994 Mercedes-Benz C63 AMG 2009 |
|
|
|
|
03-16-2018
|
#4 |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
|
Re: Intake gasket sets?
I use the thinner Plenum Gaskets 1/32" and I have TB Coolant Blocked at Injector Housing on ALL ZR-1s
|
|
|
|
|
03-18-2018
|
#5 |
 
Join Date: Oct 2016
Location: Shepparton. Vic. Australia
Posts: 135
|
Re: Intake gasket sets?
Could someone please explain why there are different thickness gaskets available? Does it depend on the year model, that they are a different thickness???
Cheers🇦🇺 |
|
|
|
|
03-18-2018
|
#6 |
|
Join Date: Aug 2014
Location: Trois-Rivieres (QC)
Posts: 473
|
Re: Intake gasket sets?
No.
From what I understood, the only advantage of 3/64'' is that they may be re-usable after a plenum removal, compared to 1/32''.
__________________
Mazda RX-7 1992 Chevrolet Corvette ZR-1 1991 Dodge Viper RT/10 1994 Mercedes-Benz C63 AMG 2009 |
|
|
|
|
03-18-2018
|
#7 |
|
Join Date: Oct 2016
Location: Shepparton. Vic. Australia
Posts: 135
|
Re: Intake gasket sets?
Thanks for clearing that up. When the time comes that l need to order, l now know l don’t need to order a specific thickness gasket set.
|
|
|
|
|
03-19-2018
|
#8 |
|
Join Date: Jan 2018
Location: Sweden
Posts: 73
|
Re: Intake gasket sets?
Sorry if I am hijacking the thread but on this topic I was wondering if someone of you could till me if the plenum gasket is enough or if an additional sealant is needed? When I had my car at the shop last year the mechanic also put some red sealant in addition to the gasket... I am not sure what that was...
Skickat från min GEM-701L via Tapatalk |
|
|
|
|
03-19-2018
|
#9 |
|
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,788
|
Intake gasket sets?
I have Throttle Body Coolant blocked at Injector Housings and do not use anything on 1/32 Plenum Gaskets.
Set Plenum in Place making ALL electrical and vacuum connections and then slide gaskets in place (lift Plenum just enough to slide gaskets in place). I tighten Plenum SS Allen Head Bolts tight but not too tight and then check them once in a while (less than what book calls for as I have no coolant to TB)  Sent from my iPhone using ZR-1 Net Registry
__________________
Left Clickable links  -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 03-19-2018 at 03:19 PM. |
|
|
|
|
03-20-2018
|
#10 | |
|
Join Date: Jan 2018
Location: Sweden
Posts: 73
|
Re: Intake gasket sets?
Quote:
Skickat från min GEM-701L via Tapatalk |
|
|
|
|
 |
|
|
Hybrid Mode
