WTB: Fuel Injector Gaskets - ZR-1 Net Registry Forums

Scrrem · 01-30-2012

I pulled my plenum yesterday and while carefully removing the connectors off of the fuel injectors, I noticed I am missing one of those square gaskets that fit up in the connector for the fuel injector. Can you still get those from GM?
Rich

GOLDCYLON · 01-30-2012

Not sure but if not Marc Haibeck might be able to hook you up

Scrrem · 01-30-2012

Quote:

Originally Posted by GOLDCYLON

Not sure but if not Marc Haibeck might be able to hook you up

I'll check with him, I have to send him some parts anyway. I checked Jerry's site, didn't see any. It seems like a common part that may still be used in modern cars, GM may still carry them.
Rich

bobbyhi · 01-30-2012

I lost 2 of them during my plenum pull. I made new ones with gasketing material of the same thickness. Been in there for a couple of years now and no problems. Total cost around $1........use an existing one for the pattern...............

mike100 · 01-30-2012

You can just swing by the pull-it-yourself wrecking yard and get those same rubber seals out of any bosch style injector plug- just about most of the 90's f.i. out there. 4 cyl, V6, V8.

Scrrem · 01-30-2012

Quote:

Originally Posted by mike100

You can just swing by the pull-it-yourself wrecking yard and get those same rubber seals out of any bosch style injector plug- just about most of the 90's f.i. out there. 4 cyl, V6, V8.

Cool, that's kind of what i thought. I don't think injector connectors have changed a whole lot over the years. I'll take one with me to be sure.
Rich

4-cam · 01-31-2012

Or you could order a new plug from Rockauto for a a little over 6 bucks. I would think the gasket would be in a new one. It may not be a bad idea to have a few of these in the spare parts bin anyways

ACDELCO Part # PT2384

{#88862303} 2-WAY FEMALE BLACK

CONNECTOR,INJR-FUEL 2 DOORS; W/CENTERED INDEX SLOT W/RELEASE

Scrrem · 01-31-2012

Quote:

Originally Posted by 4-cam

Or you could order a new plug from Rockauto for a a little over 6 bucks. I would think the gasket would be in a new one. It may not be a bad idea to have a few of these in the spare parts bin anyways

ACDELCO Part # PT2384

{#88862303} 2-WAY FEMALE BLACK

CONNECTOR,INJR-FUEL 2 DOORS; W/CENTERED INDEX SLOT W/RELEASE

Not a bad idea, think I'll pick one up...Thanks

Rich

VetteMed · 01-31-2012

I think I've been running without a few of those, I don't think it's likely to be a big deal unless the motor is being washed or otherwise gets very wet.

Y-me · 02-02-2012

Sh*t come over here and I'll give you one.

01-30-2012	#1
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,469	WTB: Fuel Injector Gaskets I pulled my plenum yesterday and while carefully removing the connectors off of the fuel injectors, I noticed I am missing one of those square gaskets that fit up in the connector for the fuel injector. Can you still get those from GM? Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

01-30-2012	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: WTB: Fuel Injector Gaskets Not sure but if not Marc Haibeck might be able to hook you up __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-30-2012	#4
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	Re: WTB: Fuel Injector Gaskets I lost 2 of them during my plenum pull. I made new ones with gasketing material of the same thickness. Been in there for a couple of years now and no problems. Total cost around $1........use an existing one for the pattern............... __________________ Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19

01-30-2012	#5
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,802	Re: WTB: Fuel Injector Gaskets You can just swing by the pull-it-yourself wrecking yard and get those same rubber seals out of any bosch style injector plug- just about most of the 90's f.i. out there. 4 cyl, V6, V8.

01-31-2012	#7
4-cam Join Date: Feb 2010 Location: Arvada Colorado Posts: 194	Re: WTB: Fuel Injector Gaskets Or you could order a new plug from Rockauto for a a little over 6 bucks. I would think the gasket would be in a new one. It may not be a bad idea to have a few of these in the spare parts bin anyways ACDELCO Part # PT2384 {#88862303} 2-WAY FEMALE BLACK CONNECTOR,INJR-FUEL 2 DOORS; W/CENTERED INDEX SLOT W/RELEASE __________________ [I]4-cam[/I] [I]1991 ZR-1 Blk/Gry #31[/I] [I]SW Headers/Xpipe- Dynomax Muffs[/I] [I]Ported top end[/I] [I]Secondaries Removed[/I] Tune by Dominic

01-31-2012	#9
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,828	Re: WTB: Fuel Injector Gaskets I think I've been running without a few of those, I don't think it's likely to be a big deal unless the motor is being washed or otherwise gets very wet. __________________ 2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold)

02-02-2012	#10
Y-me Join Date: Jul 2011 Location: Ft Myers Fl Posts: 224	Re: WTB: Fuel Injector Gaskets Sh*t come over here and I'll give you one.