LED headlight upgrade - Page 10 - ZR-1 Net Registry Forums

secondchance · 01-10-2017

Quote:

Originally Posted by Ahomans

Thanks Yun. I will try that. Seems easy to before I put the housings back on.
Al

Sent from my SM-T550 using ZR-1 Net Registry mobile app

Can be done even with the housing on. There are semi-circular openings around the bezel opening to access adjustment screws.

Ahomans · 01-10-2017

I left the housings off so I can clean them so I think I might as well align the lights first, then put the housings back on. Screws will be a little easier to get to. The housings probably don't get washed very often.

Sent from my SM-T550 using ZR-1 Net Registry mobile app

steve1263 · 01-28-2017

Quote:

Originally Posted by Billy Mild

BOX:

Light:

Comparison between stock and new LED light. This is in my garage

LED Fogs, One LED headlight, and One stock headlight.

Now that I have both LED headlights the fogs no longer work. I am going to fix that.

Billy
I used the same led headlights as you, I got them here for $119 apiece:
https://www.larsenlights.com/larsen-...el-a0102-hi-lo
they work great.

As far as the fog light problem, I solved it with one of these plug and play resistors which I got here:

https://www.superbrightleds.com/more...lbs/2179/5079/

They are sold by the pair but you just need one, the resistor is a little big but it fits nicely behind the headlight bucket and it fixed the problem with the fog lights

GOLDCYLON · 01-28-2017

How do those resisters interface ? Do they just plug in line behind the headlight connectors ?

edram454 · 01-28-2017

Quote:

Originally Posted by steve1263

Billy
I used the same led headlights as you, I got them here for $119 apiece:
https://www.larsenlights.com/larsen-...el-a0102-hi-lo
they work great.

As far as the fog light problem, I solved it with one of these plug and play resistors which I got here:

https://www.superbrightleds.com/more...lbs/2179/5079/

They are sold by the pair but you just need one, the resistor is a little big but it fits nicely behind the headlight bucket and it fixed the problem with the fog lights

this is the cree light that I was talking about. these are great lights and look fantastic on the zr1. easy install and great performance and look.

edramos

steve1263 · 01-28-2017

Quote:

Originally Posted by GOLDCYLON

How do those resisters interface ? Do they just plug in line behind the headlight connectors ?

It has H4 male a female plugs and plugs in between the headlight and the headlight socket. Nice and easy

GOLDCYLON · 01-28-2017

Quote:

Originally Posted by steve1263

It has H4 male a female plugs and plugs in between the headlight and the headlight socket. Nice and easy

Awesome thanks

HAWAIIZR-1 · 01-28-2017

Quote:

Originally Posted by steve1263

As far as the fog light problem, I solved it with one of these plug and play resistors which I got here:

https://www.superbrightleds.com/more...lbs/2179/5079/

They are sold by the pair but you just need one, the resistor is a little big but it fits nicely behind the headlight bucket and it fixed the problem with the fog lights

Thanks for the great tip. Order placed and I will give the extra resistor to a friend here that is also interested in LED headlight upgrade.

G8nightman · 01-28-2017

Quote:

Originally Posted by steve1263

Billy
I used the same led headlights as you, I got them here for $119 apiece:
https://www.larsenlights.com/larsen-...el-a0102-hi-lo
they work great.

As far as the fog light problem, I solved it with one of these plug and play resistors which I got here:

https://www.superbrightleds.com/more...lbs/2179/5079/

They are sold by the pair but you just need one, the resistor is a little big but it fits nicely behind the headlight bucket and it fixed the problem with the fog lights

I use the same lights great product. Only complain i have is if you drive at night and bugs hit the Plastic on the front it will leave a stain other than that they are great.

Ahomans · 01-28-2017

Steve,
Where did you get the LED fog Lights?
Al

Sent from my SM-T550 using ZR-1 Net Registry mobile app

01-10-2017	#92
Ahomans Join Date: Jan 2016 Location: Arnold, MD Posts: 34	Re: LED headlight upgrade I left the housings off so I can clean them so I think I might as well align the lights first, then put the housings back on. Screws will be a little easier to get to. The housings probably don't get washed very often. Sent from my SM-T550 using ZR-1 Net Registry mobile app

01-28-2017	#94
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,152	Re: LED headlight upgrade How do those resisters interface ? Do they just plug in line behind the headlight connectors ? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 01-28-2017 at 04:52 PM.

01-28-2017	#100
Ahomans Join Date: Jan 2016 Location: Arnold, MD Posts: 34	Re: LED headlight upgrade Steve, Where did you get the LED fog Lights? Al Sent from my SM-T550 using ZR-1 Net Registry mobile app