Help me piece together my Tech 1a please ... pics of what I currently have inside --- - Page 3 - ZR-1 Net Registry Forums

alwayscode390 · 12-02-2013

I think I found a used Bosch Cable.

Bosch contacted me back this morning, and said I need a business account with them to purchase anything directly through them ... and I need to find a local business to see if they have it or can even get it LOL.

Good thing I found a used one, that seems like quite the hassle. ---

GOLDCYLON · 12-02-2013

Quote:

Originally Posted by mike100

If you have the RJ45 jack on the side, you may have an early Tech1A- just it was still labelled as a tech1 until they marketed it as an upgrade with more testing capability. That is how mine was. After factory refurb, I got the tech1a label and a new keypad label as part of the refurb.

The jack plug is for the voltage probe feature to inject certain test voltages into various circuits according to factory procedures that may call for it.

Its also a printer port for a very early thermal printer. Also the early 1A are labled on the back side before they labeled the front side later as Mike correctly states.

Schrade · 12-02-2013

I'd rather hunt down a vacuum leak, than find a bad circuit... I THINK.

Although electrons are a little harder to see than AIR

Franke · 12-02-2013

Quote:

Originally Posted by Schrade

I'd rather hunt down a vacuum leak, than find a bad circuit... I THINK.

Although electrons are a little harder to see than AIR

But Schrade, Electrons should be attracted to you because of your positive personality.

GOLDCYLON · 12-02-2013

Ok top is indeed 26 pins here are the pics of the parts you will need to get that tech1A to work. Noticed how the power supply plugs into the adapter in pic three? That's the one you want. The Tech 1 uses a separate power that the tech1A combines

alwayscode390 · 12-02-2013

Perfect, so you plug the power into the DLC cord ... can you still plug it into the side of the unit if you want , too?

Thanks for that ! ---

EDIT: The cord I posted on the first page combined the power into the cord also ... is that a tech 1 cord? Its a 15pin to 12 pin cord. I need to identify it to sell it

---

GOLDCYLON · 12-02-2013

Quote:

Originally Posted by alwayscode390

Perfect, so you plug the power into the DLC cord ... can you still plug it into the side of the unit if you want , too?

Thanks for that ! ---

EDIT: The cord I posted on the first page combined the power into the cord also ... is that a tech 1 cord? Its a 15pin to 12 pin cord. I need to identify it to sell it

---

I cannot remember I believe the unit can use either. However I have an early tech 1 A and it also has a power input on the side as well

12-02-2013	#21
alwayscode390 Join Date: Dec 2012 Location: STL Posts: 492	Re: Help me piece together my Tech 1a please ... pics of what I currently have inside I think I found a used Bosch Cable. Bosch contacted me back this morning, and said I need a business account with them to purchase anything directly through them ... and I need to find a local business to see if they have it or can even get it LOL. Good thing I found a used one, that seems like quite the hassle. --- __________________ [SIGPIC][/SIGPIC] 01' Dodge Viper GTS 11' Ford Raptor 90' ZR-1 Corvette LPE #699

12-02-2013	#23
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Help me piece together my Tech 1a please ... pics of what I currently have inside I'd rather hunt down a vacuum leak, than find a bad circuit... I THINK. Although electrons are a little harder to see than AIR __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

12-02-2013	#25
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,152	Re: Help me piece together my Tech 1a please ... pics of what I currently have inside Ok top is indeed 26 pins here are the pics of the parts you will need to get that tech1A to work. Noticed how the power supply plugs into the adapter in pic three? That's the one you want. The Tech 1 uses a separate power that the tech1A combines __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 12-02-2013 at 09:27 PM.

12-02-2013	#26
alwayscode390 Join Date: Dec 2012 Location: STL Posts: 492	Re: Help me piece together my Tech 1a please ... pics of what I currently have inside Perfect, so you plug the power into the DLC cord ... can you still plug it into the side of the unit if you want , too? Thanks for that ! --- EDIT: The cord I posted on the first page combined the power into the cord also ... is that a tech 1 cord? Its a 15pin to 12 pin cord. I need to identify it to sell it --- __________________ [SIGPIC][/SIGPIC] 01' Dodge Viper GTS 11' Ford Raptor 90' ZR-1 Corvette LPE #699 Last edited by alwayscode390; 12-02-2013 at 09:32 PM.