|
04-07-2009
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,191
|
Cam Cover Emblems
Talked to a company today that makes enamel emblems, they looked at the cam cover emblems and said they can make them, just need to check and verify heat resistence. tooling fees are minimal.
Any interest.....I do not think the cost will be much or am I chasing something that has been addressed.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 04-07-2009 at 05:48 PM. |
|
|
|
04-07-2009
|
#2 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,643
|
Re: Cam Cover Emblems
JeffVette has a limited supply of aftermarket ones that he's selling, but I don't know if he has enough to meet future demands.
He's hand painting them, and from what I've seen they look pretty sharp. TomC "Crabs"
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] |
|
|
|
|
04-07-2009
|
#3 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Cam Cover Emblems
I'd buy a pair.
|
|
|
|
|
04-07-2009
|
#4 |
 Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,535
|
Re: Cam Cover Emblems
I don't especially need any right now but would be happy to sign up for a couple to help the cause.
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
|
|
|
|
04-07-2009
|
#5 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,191
|
Re: Cam Cover Emblems
I will want to make sure these hold up and are good first. If they look like crap, will just let it go....they were very interested when I sent it to them. I will have a tooling cost of about $100.
The adhesive might be the biggest challenge. They may also be able to do key chains from the emblem, two sided, maybe with 3/4 digit VINs on the back, alot of options. I will get the material info first. Price should be very very reasonable but let me confirm first.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
04-07-2009
|
#6 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: Cam Cover Emblems
Quote:
 Keep us posted Lee im interested in the listed above aspect of the project.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
04-08-2009
|
#7 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
Re: Cam Cover Emblems
Lee,i kept my OE emblems off my cam covers this time,was going to buy a set of aftermarket.
If you get these done at a decent price i also am interested. I would love to get a key chain version with year and VIN Black high temp RTV works great. Let me know. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
04-08-2009
|
#8 |
Join Date: Aug 2005
Location: Northridge, CA
Posts: 1,445
|
Re: Cam Cover Emblems
Great Project!
I'm interested! Last edited by tf95ZR1; 05-26-2009 at 06:36 PM. |
|
|
|
|
04-08-2009
|
#9 |
 Join Date: Nov 2006
Location: Germantown, Maryland
Posts: 522
|
Re: Cam Cover Emblems
Cool!
|
|
|
|
|
04-09-2009
|
#10 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,191
|
Re: Cam Cover Emblems
Company confirmed today that the cam emblem can he made with high temp enamel and would do fine with underhood temps. I need to get a cam emblem to them and they will send it over to build the die.
If interested we can incorporate the 3/4 digit VIN...other things we can have made: -Coins with Vin stamp on back -Key chains -Bottle openers Start up cost will be $125, they will send me a sample...colored sections will be done with enamel and the body will be black nickel finish. Let me know your thoughts
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
 |
|
|
Linear Mode
