|
02-04-2024 | #1 | |
Join Date: May 2010
Location: Japan
Posts: 3,549
|
Re: WTB: Front license plate ram air intake
Quote:
Hey John, I don?t know all the science behind designing the perfect cold air or forced air inlet, but I really don?t like the stock design knowing how hot the temps are in the engine compartment. The stock system is just very poorly designed. For shits, grins, and giggles I?m modifying the Breathless vortex system with similar thoughts like you to insulate the intake from heat and draw cool air in through the housing where it comes in from the bottom. It surely can?t hurt. Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 |
|
02-04-2024 | #2 |
Join Date: Feb 2010
Location: Ochlocknee, GA
Posts: 426
|
Re: WTB: Front license plate ram air intake
CRAIG,
Here are some photos of the ram air system I made for my 1990 ZR-1. I have had some trouble posting my photos, keeping my fingers crossed. stock air filter with open air filter cover Attachment 20147 open filter with scoop from the front bumper opening Attachment 20148 5.5 in hole made into front of bumper Attachment 20149 complete air system put together outside of car ZR-1 Splash front plate cutout to feed outside air into the sealed air box. Attachment 20150 Complete outside air system put together outside of car. Attachment 20151 |
|
|