|
05-10-2013
|
#11 |
 Join Date: May 2005
Location: Nichols, FL
Posts: 615
|
Re: Resurection - Engine Wiring Harness
George
The 89 electrical wiring manual includes the ZR 1 wiring diagram. I would use that as your source. Also note that the primary fuel pump is controlled by the oil pressure sensor. No oil pressure no pump. I just wired mine direct. The 89 ecm does not have a control output to accomplish this. As long as you use an 89 dis module the wiring will be correct. Tyler
__________________
55 Polo White (Project) 61 Jewel Blue (Sold to buy above) 66 Nassau Blue 68 Torch Red 88 ZR1 Blue 90 ZR1 White |
|
|
|
05-13-2013
|
#12 |
 Join Date: Dec 2003
Posts: 467
|
Re: Resurection - Engine Wiring Harness
Photos for those with an interest. Two Z engine harness side by side, an early and a late ’89. The mounting on the firewall differs. Other photo is of the firewall on an ‘89 L98 for comparison. George
|
|
|
|
 |
|
|
Linear Mode
