Help with connector identification - brain fog - 90 - ZR-1 Net Registry Forums

Corvette95 · 09-29-2022

So after a long day I come home and decide to quit procrastinating and change the dryer sheets out of my 90 ( rodent repellant). In doing so, I see this plug not plugged in. I really didn't think there was a connector on any C4 I couldn't identify cold. It is the blue/white - brown 2 wire connector on the drivers side engine harness near the FX3 harness and the brake reservoir level connector. If anyone would identify this connector, it would help me sleep tonight or I will have to break out the FSM. Thanks as always!
https://postimg.cc/TyXNGv3V
https://i.postimg.cc/MGnC7WkF/90-LT5-Harness.jpg

secondchance · 09-29-2022

I have a 94 and the same plug has been just hanging there forever also.
I hope you can sleep tonight.

JG95ZR1 · 09-29-2022

It?s for the exhaust recirculating blow off valve that is deleted when you install headers. Not sure what the correct name for it is was connected to the motor in the front left wheel well that pulls gas?s from manifolds

Sent from my iPhone using ZR-1 Net Registry

Corvette95 · 09-30-2022

Dang! Thanks guys. That brings back my memory of putting it there when I installed the headers. Thank you again for the replies, I can now put the 2 FSMS back in the closet because I did pull them out last night so I could look that up this morning.

09-29-2022	#1
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,105	Help with connector identification - brain fog - 90 So after a long day I come home and decide to quit procrastinating and change the dryer sheets out of my 90 ( rodent repellant). In doing so, I see this plug not plugged in. I really didn't think there was a connector on any C4 I couldn't identify cold. It is the blue/white - brown 2 wire connector on the drivers side engine harness near the FX3 harness and the brake reservoir level connector. If anyone would identify this connector, it would help me sleep tonight or I will have to break out the FSM. Thanks as always! https://postimg.cc/TyXNGv3V https://i.postimg.cc/MGnC7WkF/90-LT5-Harness.jpg __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

09-29-2022	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,703	Re: Help with connector identification - brain fog - 90 I have a 94 and the same plug has been just hanging there forever also. I hope you can sleep tonight.

09-29-2022	#3
JG95ZR1 Join Date: Aug 2017 Location: Queens, NY Posts: 157	Re: Help with connector identification - brain fog - 90 It?s for the exhaust recirculating blow off valve that is deleted when you install headers. Not sure what the correct name for it is was connected to the motor in the front left wheel well that pulls gas?s from manifolds Sent from my iPhone using ZR-1 Net Registry

09-30-2022	#4
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,105	Re: Help with connector identification - brain fog - 90 Dang! Thanks guys. That brings back my memory of putting it there when I installed the headers. Thank you again for the replies, I can now put the 2 FSMS back in the closet because I did pull them out last night so I could look that up this morning. __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454