Rebuilding Fuel Pump Sending Unit - ZR-1 Net Registry Forums

mmitton · 04-10-2019

Common problem for my 90 - the fuel gauge hasn't worked for a long time. It always shows empty. Tried to find a replacement with no luck so after some searching I found a place that claims to be able to rebuild the one I have. I'm a little hesitant so I'm wondering if any of you have ever heard of them or perhaps used them. Here's the link: http://www.tristarrradiator.com/

Andy · 04-10-2019

Haven't used them but have used Bob's Speedometer in Michigan (google for more info) with great results (it was an original, wired wound type rather than the thin film).

04-10-2019	#1
mmitton Join Date: Nov 2018 Location: Arizona and Wyoming Posts: 4	Rebuilding Fuel Pump Sending Unit Common problem for my 90 - the fuel gauge hasn't worked for a long time. It always shows empty. Tried to find a replacement with no luck so after some searching I found a place that claims to be able to rebuild the one I have. I'm a little hesitant so I'm wondering if any of you have ever heard of them or perhaps used them. Here's the link: http://www.tristarrradiator.com/

04-10-2019	#2
Andy Join Date: Aug 2014 Location: Chantilly, VA Posts: 37	Re: Rebuilding Fuel Pump Sending Unit Haven't used them but have used Bob's Speedometer in Michigan (google for more info) with great results (it was an original, wired wound type rather than the thin film). __________________ 1990 black on black #1042 - sadly - sold 1993 Ruby #140 - stock 1991 QB #1608 - heads and top end ported, Watson headers, B&B 3"exhaust, Haibeck chip, 4.10 gears