|
11-27-2020
|
#1 |
 Join Date: Nov 2016
Location: New Brunswick
Posts: 936
|
Is It Bad If This Is Rattling Around Inside?
When I took my car to the new tech, he removed the ECM for some troubleshooting. He was surprised when he had it out that something inside was rattling. This is what he found:
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
|
|
11-27-2020
|
#2 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: Is It Bad If This Is Rattling Around Inside?
yes.. car might not run right..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
11-27-2020
|
#3 | |
|
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
|
Re: Is It Bad If This Is Rattling Around Inside?
Quote:
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
|
|
|
|
11-27-2020
|
#4 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: Is It Bad If This Is Rattling Around Inside?
Quote:
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
11-27-2020
|
#5 | |
|
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
|
Re: Is It Bad If This Is Rattling Around Inside?
Quote:
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
|
|
|
|
11-27-2020
|
#6 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
Re: Is It Bad If This Is Rattling Around Inside?
If you want i can solder the chip to your MEM-CAL and will never have that issue again.
Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
11-28-2020
|
#7 | |
|
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
|
Re: Is It Bad If This Is Rattling Around Inside?
Quote:
That?s good to know. Let me see how this goes. Erik
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
|
|
|
|
11-28-2020
|
#8 | |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,680
|
Re: Is It Bad If This Is Rattling Around Inside?
Quote:
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
|
11-28-2020
|
#9 |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Is It Bad If This Is Rattling Around Inside?
Have seen one using the G1 chip adapter come loose. It was the MEMCAL chip assembly detaching from the G1 adapter because the G1 wasn't fully seated. The G1 should "clip" in just like the MEMCAL unit does.
Agree with Pete that soldering is a permanent solution, but the G1 should not cause issues if installed correctly.. Securing the "piggyback" assembly if it came loose is a 5 minute repair... you can add a dab of silicone (for electronics) to help if the G1 to MEMCAL is not tight.37751.jpg Sent from my SM-G950U using ZR-1 Net Registry mobile app |
|
|
|
|
11-28-2020
|
#10 | |
|
Join Date: Nov 2016
Location: New Brunswick
Posts: 936
|
Re: Is It Bad If This Is Rattling Around Inside?
Quote:
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
|
|
|
 |
|
|
Linear Mode
