Ruff Idle ,Huge Loss of Power

[WARP TEN]

Originally Posted by Tripler

Shame the forum does not have a thumbs up option because I would really like to thumb up everyones posts . Extremely helpful . I have never heard of noids before lol but I see I can buy them here at our Canadian tire . On Monday I will check the ohm readings on the coils and attempt a test of injector electrical leads .

Thanks for that pic of the service module plug and coil ohm info


Thumbs Up

Sent from my SM-A205W using Tapatalk

Let me second the need for a Thumbs up or Like button. I have liked those on all the other forums; maybe this is another symptom of the aging vBulletin sites. Any way to add this feature to our existing forum site? --Bob

[Ccmano]

Originally Posted by WARP TEN

Let me second the need for a Thumbs up or Like button. I have liked those on all the other forums; maybe this is another symptom of the aging vBulletin sites. Any way to add this feature to our existing forum site? --Bob

Not a bad idea. I have put in a request. Keep in mind we are limited to forum capabilities which are out of our hands.

Of course you can simply use an emoji from the Selection to the right of the message box when you write the post.



H

[WARP TEN]

Originally Posted by Ccmano

Not a bad idea. I have put in a request. Keep in mind we are limited to forum capabilities which are out of our hands.

Of course you can simply use an emoji from the Selection to the right of the message box when you write the post.



H

Thanks Hans. I realize some things are out of your control and some just can't be done with a specific platform. --Bob

[Tripler]

Found 2 coils that have zero ohms readings and the other 2 work fine . Ordered 4 new from Corvette Depot .
There on back order so a few weeks to receive them .


Sent from my SM-A205W using Tapatalk

[Tripler]

Did the noid test . All primary injectors lit up .
[emoji106]

Sent from my SM-A205W using Tapatalk

[Macroblock]

Originally Posted by Tripler

Did the noid test . All primary injectors lit up .
[emoji106]

Awesome - Great Job!

[Tripler]

Originally Posted by Macroblock

Awesome - Great Job![emoji106]

Thanks Mac [emoji106] . Is there any other tests I need to do ?


Sent from my SM-A205W using Tapatalk

[Macroblock]

Tripler - it sounds like you narrowed it down to an ignition issue. Once you replace the coils and reassemble the plenum, you'll be able to test.

Coils that are not providing adequate voltage are a sign of trouble and will cause the driveability issue you describe.

[Tripler]

I am hoping that's all it is . I have replaced all the 25 year old bits that needed upgrades so far and I sure am looking forward to putting it back together . Again a huge thank you and thumbs up ...



[emoji106][emoji846]

Sent from my SM-A205W using Tapatalk

[Macroblock]

No sweat. Let us know how you make out.