Need your ideas - LT5 won?t turnover - Page 3 - ZR-1 Net Registry Forums

lfalzarano · 03-03-2022

Quote:

Originally Posted by A26B

A bent clutch fork can also cause a low pedal disengagement. Bent and broken clutch forks are an infrequent but known occurrence in the ZR-1.

Lets see an apostrophe '', and a Question mark???
Showed up fine from my keyboard

I'm using an iPhone and sometimes W10 laptop.

lfalzarano · 03-03-2022

Quote:

Originally Posted by tf95ZR1

Keeping it simple (KISS) are they depressing
the clutch pedal all the way to the floor?

Yes, and it was still hard to shift gears.

aafc · 03-03-2022

I don't know if this helps you, but it got me home.
Before I changed from the zf gear box to an auto, I had no start while out
shopping. Would not turn over engine, Set park brake, car in neutral,
key to on position took a jumper wire and connected it to power then
touch to the purple wire direct to starter.
( car in neutral! when you do this )
Got car car started and drove home. As it turned out the
clutch safety switch had an open in the ckt.
my no start was not because of clutch repair. So not sure if this helps.

John
1990 white/black #2546
one of a few 4l8OE EQ R-1's

Paul Workman · 03-03-2022

Quote:

Originally Posted by Young1

It?s not necessary to move to remove the ECU, you just remove it from its bracket and flip it over out of the way. If they took all the clips out of the back of the eco and put them back in incorrectly that could be your problem. Again not rocket science.

Agree. But, too if they DID disconnect the ECU, there's the chance to bend one of the pins. But, an OBD-1 scanner would probably(?) pick up on that pretty quick. But, yeah. I can't imagine how changing the clutch hydraulics and hardware would affect anything to do with starting - ordinarily (that is).

I've come to hate taking my cars to anyone except a known GOOD mechanic...and they're darn few, it seems. And, DEALERS (aka parts swappers) especially! Like: when was the last time they worked on a ZR-1??? Was the mechanic even BORN when the car came out???

lfalzarano · 03-04-2022

Thanks to everyone. IT IS FIXED! A second mechanic found the Clutch safety switch was defective AND REPLACED IT. yeah!

03-03-2022	#23
aafc Join Date: Feb 2010 Location: Ochlocknee, GA Posts: 424	Re: Need your ideas - LT5 won?t turnover I don't know if this helps you, but it got me home. Before I changed from the zf gear box to an auto, I had no start while out shopping. Would not turn over engine, Set park brake, car in neutral, key to on position took a jumper wire and connected it to power then touch to the purple wire direct to starter. ( car in neutral! when you do this ) Got car car started and drove home. As it turned out the clutch safety switch had an open in the ckt. my no start was not because of clutch repair. So not sure if this helps. John 1990 white/black #2546 one of a few 4l8OE EQ R-1's

03-04-2022	#25
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Need your ideas - LT5 won?t turnover Thanks to everyone. IT IS FIXED! A second mechanic found the Clutch safety switch was defective AND REPLACED IT. yeah! __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]