02 Sensors - ZR-1 Net Registry Forums

Perry Mitchell · 11-15-2023

For my LT 5/Camaro project I need two O2 sensors. The O2 sensor on the passenger side interferes with the oil pan on my 700 R4 transmission. I am looking for a shorter sensor. Who makes the best sensor for our motors. Mine is stock with long tube headers. Any recommendations for a short, quality sensor?

Corvettes White · 11-15-2023

Mr. Mitchell.

Not a direct answer to your question. Have you considered relocating the sensor itself? I had problems with wire routing and fitment on my '99 corvette. Moving the bungs a few inches was easier than making shielding. It also afforded me an opportunity to make access to the sensors easer from the point of view of maintenance as opposed to factory assembly.

Sounds like an interesting project. Good luck with it

George

XfireZ51 · 11-16-2023

AC Delco are the only ones I use. Possibly Denso. Bosch is prone to drop outs.

WARP TEN · 11-16-2023

I think George's idea of simply moving the bungs makes a lot of sense, especially as I recall all the tales of woe when changing them out on regular ZR-1s. --Bob

Jagdpanzer · 11-16-2023

I've had good results with the NTK 21003 O2 sensors
https://www.ebay.com/itm/30506306349...is&media=EMAIL

Sent from my iPhone using ZR-1 Net Registry

11-15-2023	#1
Perry Mitchell Join Date: Nov 2018 Location: Washington Posts: 98	02 Sensors For my LT 5/Camaro project I need two O2 sensors. The O2 sensor on the passenger side interferes with the oil pan on my 700 R4 transmission. I am looking for a shorter sensor. Who makes the best sensor for our motors. Mine is stock with long tube headers. Any recommendations for a short, quality sensor?

11-15-2023	#2
Corvettes White Join Date: Dec 2003 Posts: 467	Re: 02 Sensors Mr. Mitchell. Not a direct answer to your question. Have you considered relocating the sensor itself? I had problems with wire routing and fitment on my '99 corvette. Moving the bungs a few inches was easier than making shielding. It also afforded me an opportunity to make access to the sensors easer from the point of view of maintenance as opposed to factory assembly. Sounds like an interesting project. Good luck with it George

11-16-2023	#3
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,661	Re: 02 Sensors AC Delco are the only ones I use. Possibly Denso. Bosch is prone to drop outs. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

11-16-2023	#4
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,030	Re: 02 Sensors I think George's idea of simply moving the bungs makes a lot of sense, especially as I recall all the tales of woe when changing them out on regular ZR-1s. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

11-16-2023	#5
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,644	Re: 02 Sensors I've had good results with the NTK 21003 O2 sensors https://www.ebay.com/itm/30506306349...is&media=EMAIL Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake