06-03-2015 | #1 |
Join Date: Dec 2012
Location: Ponoka, Alberta, Canada
Posts: 158
|
12 Volt relay to feed the coils???
A popular mod on Motorcycles is to install a 12 volt relay and run heavier gauge wire direct from the battery to feed the coils, The existing 12 volt feed is used on the trigger side of the relay.
This puts approx 12.5 volts direct to the coils, reducing current on the switchgear and reducing voltage drop through the system. Would this be a benefit to Our ZR-1's, would there be any risk to the ECM?
__________________
91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes |
|
|