DIY Fuel Injector Testor - ZR-1 Net Registry Forums

Jagdpanzer · 06-26-2019

Here are photos of a home made fuel injector test rig I set up to check out a set of larger injectors I will be installing. They had been setting on the shelf for a while and I wanted to make sure they were good to go. Used a spare fuel rail I had laying around and my HM engine pre-oiler for the pressurized fuel supply source. Fired the injectors with this nifty tester I found on Amazon for $32. All injectors tested fine.
IMG_0158.JPG

IMG_0162.JPG

IMG_0157.JPG

06-26-2019	#1
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,644	DIY Fuel Injector Testor Here are photos of a home made fuel injector test rig I set up to check out a set of larger injectors I will be installing. They had been setting on the shelf for a while and I wanted to make sure they were good to go. Used a spare fuel rail I had laying around and my HM engine pre-oiler for the pressurized fuel supply source. Fired the injectors with this nifty tester I found on Amazon for $32. All injectors tested fine. IMG_0158.JPG IMG_0162.JPG IMG_0157.JPG __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 06-26-2019 at 08:47 PM.