|
05-05-2020
|
#1 |
|
Join Date: Feb 2016
Location: Carterville Illinois
Posts: 845
|
Window won't go up all the way...
Just looking for suggestions on my issue.
So I changed the outside window seal on the passenger side this weekend. I had done the driver side a few years ago with no issues, and knew what to expect. I fought for a few hours to get the seal on, re-connected everything and got it all back together. I went to roll the window up and it stopped about 3-4 inches from going all the way up. I'm thinking I tightened the window felt things too tight? I'm going to have to tear it all apart again and was looking for any ideas of what I did or didn't do..... |
|
|
|
05-05-2020
|
#2 |
 
Join Date: Jan 2006
Location: Decatur, AL
Posts: 1,105
|
Re: Window won't go up all the way...
You will probably figure it out pretty quick with the door panel off, but the wiring harness clip could be broken or off and it can bind the window from rolling up. This is more common in 89 and earlier with the speakers in the doors. There is also a plastic protector / guide for the outside mirror wiring that gets moved and the mirror wiring can catch the window...this is my bet.
__________________
Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454 |
|
|
|
|
05-09-2020
|
#3 |
|
Join Date: Jun 2015
Location: Texas
Posts: 530
|
Re: Window won't go up all the way...
When I did my outer seal a few years ago I had to fiddle with the adjustments a few times to get it right. I think your felts are too tight.
|
|
|
|
|
05-13-2020
|
#4 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: Window won't go up all the way...
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
 |
|
|
Linear Mode
