LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS - Page 17 - ZR-1 Net Registry Forums

Jagdpanzer · 06-01-2008

Quote:

Originally Posted by Sgreg

Wow, only a 10 foot ceiling. It looks like you can almost stand up under one car raised as high as it will go. I have a 10 foot ceiling and always assumed I needed 12 feet. I am 6 ft. tall; would I be able to stand up under my Z on your lift ?

I just put a Bendpak HD-9 four post lift in with a 10 feet ceiling and have plenty of clearance for working under the car standing up and I'm a little taller than you. I can raise the Z to the lift's max height and still have about 4" left for releasing the locking dogs. Any more than 10 ft. ceiling height would be a waist unless you got an extra tall lift.

flyin ryan · 06-01-2008

Quote:

Originally Posted by Sgreg

Wow, only a 10 foot ceiling. It looks like you can almost stand up under one car raised as high as it will go. I have a 10 foot ceiling and always assumed I needed 12 feet. I am 6 ft. tall; would I be able to stand up under my Z on your lift ?

the picture your looking at is with my Stingray on top & it's sitting two clicks lower than my rear lift because of the door operator (side mount jackshaft operators were not availible up here when i was ordering my door from Liftmaster) if you look close you'll see the light for the operator above the car. so to answer your question, you can't stand under the front lift but the rear lift you'd have lots of room. i question why some have to have a 12' or even 14' ceilings? most times i see it turn out as a waste, IMO.

Jagdpanzer · 06-02-2008

I converted my 8 ft. door over to a torsion bar spring setup and went with the Liftmaster model 3800 sidemount garage door opener. Swaped the vertical rails out to those used for an 8 ft. high door. Except for the shaft got everything online at ProDoor (great price and fast delivery):
http://www.prodoorparts.com/products/167.cfm
Mike there was very helpful in putting together everthing needed for the conversion.
Picked the shaft up from local Home Depot, 10 ft. section of 3/4" inch regular pipe.

Zr1 Destroyer · 06-05-2008

Here's the clone....it's a fun street truck.

Put some new wheels on my nova ss projecto.

MB ZR1 · 06-10-2008

MB ZR1 · 06-10-2008

MB ZR1 · 06-10-2008

UKZR1 · 07-01-2008

That is one clean LT5 MB

I've just got back from a road trip to Le Mans and Switzerland, here's a couple of pics. I'll try and put something together for the newsletter, I know he is always looking for material

WB9MCW · 07-02-2008

Very Clean indeed MB--

Great Pic's there Gix -- yes a contrib to the newsletter would be superb

npritchard777 · 12-24-2008

View Poll Results: WHAT GENERATION CORVETTE IS YOUR FAVORITE
C1	4	1.63%
C2	42	17.07%
C3	15	6.10%
C4	168	68.29%
C5	8	3.25%
C6	9	3.66%
Voters: 246. You may not vote on this poll

06-02-2008	#163
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,644	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS I converted my 8 ft. door over to a torsion bar spring setup and went with the Liftmaster model 3800 sidemount garage door opener. Swaped the vertical rails out to those used for an 8 ft. high door. Except for the shaft got everything online at ProDoor (great price and fast delivery): http://www.prodoorparts.com/products/167.cfm Mike there was very helpful in putting together everthing needed for the conversion. Picked the shaft up from local Home Depot, 10 ft. section of 3/4" inch regular pipe. Last edited by Jagdpanzer; 06-02-2008 at 07:54 PM.

06-05-2008	#164
Zr1 Destroyer Join Date: Oct 2005 Location: Candy Apple...yUmMy Posts: 1,137	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS Here's the clone....it's a fun street truck. Put some new wheels on my nova ss projecto.

06-10-2008	#165
MB ZR1 Join Date: May 2008 Location: Stonewall, Manitoba Posts: 80	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS

06-10-2008	#166
MB ZR1 Join Date: May 2008 Location: Stonewall, Manitoba Posts: 80	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS

06-10-2008	#167
MB ZR1 Join Date: May 2008 Location: Stonewall, Manitoba Posts: 80	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS

07-02-2008	#169
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS Very Clean indeed MB-- Great Pic's there Gix -- yes a contrib to the newsletter would be superb __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

12-24-2008	#170
npritchard777 Join Date: Dec 2008 Location: Santa Maria, CA Posts: 33	Re: LETS GET SOME ACTION GOING POST A PIC OF YOUR VETTE AND TOYS