ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 08-02-2014   #161
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,633
Default Re: 4.10 gears...not what I expected.

lets play nice gentlemen
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 08-02-2014   #162
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,450
Default Re: 4.10 gears...not what I expected.

Quote:
Originally Posted by tf95ZR1 View Post
This gear ratio discussion has my head (and tires) spinning!
R R R
Anyone can tell me anything, BUT I will go with 4.10's over 3.45 in any car any day, Just sayin
PhillipsLT5 is offline   Reply With Quote
Old 08-02-2014   #163
mike100
 
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
Default Re: 4.10 gears...not what I expected.

It is so difficult to put the mathematics into words, but many of us know what the final drive and tire diameter do to the car as a whole. I have been told by two different people that 3.73's really woke up their ZR-1's that they used to own. These comments were unsolicited and just came up as advice for bang-for-buck mods. I also like this idea as there is a speedo gear available for this ratio for a clean conversion. Unfortunately I'm pretty much done with projects and I'm just keeping the car in good condition at this point, but it would be the next thing on the list if the budget was available.
mike100 is offline   Reply With Quote
Old 08-02-2014   #164
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: 4.10 gears...not what I expected.

Quote:
Originally Posted by WVZR-1 View Post
You constantly try to mess with the conversation. Your REAL GEAR is what ever the numerical numbers (ring gear/pinion) dictate. Your tire diameters alter your 'final drive' but you constantly fail to mention that. You mention 'real world' - real world is same as 'real gear' - it's the mathematical numbers of the gear set....*.
OUCH!

In spite of perhaps using less than precise or exacting terminology, I think most of us understand what Dom was trying to get at. And, he brings a valid point: whatever conclusions or direction this thread makes or takes, tire diameter variances introduced by those that have other than the "normal" tire sizes need to be considered. (OK, he only mentions wheels, but we know what he's implying, I believe.)

Just sayin....

Paul.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 08-02-2014   #165
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,656
Default Re: 4.10 gears...not what I expected.

WV,

Apologies for my lack of precision. Took too much for granted. If anyone else in this thread was thrown into a technical tizzy along w WV, please allow me to apologize to you also. Precisely.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 08-02-2014   #166
USAZR1
 
USAZR1's Avatar
 
Join Date: Oct 2013
Location: Wichita Falls,Tx
Posts: 604
Default Re: 4.10 gears...not what I expected.

Quote:
Originally Posted by XfireZ51 View Post
I installed 3.73s for mine and when power is transmitted through 19" wheels, acts like a 3.55. I would be tempted to try 3.90s
And our car has even taller rear tires than Dom,although not by a whole lot. Our 94 has 335/30/19 rears with 4.10 cogs. I like it.

No apology needed on this end,Dom. I understood completely what you were trying to say.
__________________
Clint & Sherry
1994 ZR-1 White/Red #152 (sold)
1991 ZR-1 Callaway Aerobody #1332 (sold)
1990 ZR-1 Red/Red #952 (sold)
2002 Z06 Torch Red/Mod Red widebody

Last edited by USAZR1; 08-02-2014 at 06:33 PM.
USAZR1 is offline   Reply With Quote
Old 08-02-2014   #167
WVZR-1
 
Join Date: Oct 2004
Posts: 1,889
Default Re: 4.10 gears...not what I expected.

Some 'real' information I believe. Dominic, I'll use your ratio and tires as an example. If you had 3.73 gears and your 315/35R17 tires and were 'happy' you need to be concerned about not your losses but rather what you need to do to compensate for the increased tire that you added or you just disregard it and don't worry.

I'll use that for a start. I picked a MPH # because one is need to start from so I chose 60 MPH and 4th gear. I always use 1:1 regardless of the transmission. A 3.73 @ 60 MPH I got 2960 RPM by this:

60 X 3.73 X 336/25.4 (the 25.4 I used from a dimension I measured with my BFG 315/35R17's many years ago) I did NOT use the advertised diameter. That skews the results which BTW I believe the charts earlier in this thread are based off advertised numbers and not real dimensions that we can measure. Those #'s are close but NOT correct.

Now when you add the tire that you mention measuring 26.25 (in this thread) I get an RPM value of 2864:

60 X 3.73 X 336/26.25

Now to get your 'performance' back you need to add gear and since we know the various ratios available for the D44-HD it's easier to experiment using available ratios substituted into the formula.

60 X 3.90 X 336/26.25 = 2995 so you've got it all back with that gear change + very few RPMs.

If a person had 4.10's with 315/35R17 and was 'happy' then these #'s if they made the same tire change would be required.

60 X 4.10 X 336/25.4 = 3254 RPM (315's)

60 X 4.10 X 336/26.25 = 3148 RPM (26.25 measured)

The add required using available ratios:

60 X 4.30 X336/26.25 = 3302 so you've got it all back again + a few more RPMs.

These were very straight forward and it's much easier using 'known' available ratios to calculate recovery.

With your particular tire choice the 'loss' if you wanted to only be concerned with the loss is 3%. 25.4/26.25 = .96761 so the 3.45 becomes 3.34 and the 3.73 would become 3.61 or so.

Done in this fashion also to calculate the new ratio 25.4 (original tire) X 3.73 (axle ratio)/ 26.25 (new tire) = 3.6092

You could confirm those numbers I'd think by checking RPMs with an accurate tach and not the cluster component.

Every tire needs to be measured at the pressures you will intend to use and dimensions will vary for various brands.

I believe my math will stand the test. I hope or I've made a much larger A$$ of myself. There are calculators out there that likely will confirm these numbers or very close. The one I posted way back in this thread should work I believe.

This is where I got the dimensions that I used for your 19's.

Quote:
Originally Posted by XfireZ51 View Post
I have 19s on the back. The fronts are 18s. Just measured the rears sitting there w ~ 35psi, they stand at 26.25". Size is 325/30/19. These are the Nitto Invos which I like quite a bit. Good wet, fairly quiet, and grab pretty well on hard shifts.

Last edited by WVZR-1; 08-02-2014 at 11:00 PM.
WVZR-1 is offline   Reply With Quote
Old 08-02-2014   #168
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,786
Default Re: 4.10 gears...not what I expected.

When you boys are talking gear ratios to determine vehicle speed.........you should use Tire Deflected Radius.....which by the way varies with tire rotation speed just a bit. And obviously varies with tire inflation pressure. Tire Deflected Radius is the distance from the center of the wheel to the pavement.

Tech Info - ZR1 Differential Gearing and Vehicle Speed Calculations

Some more Calculations for you as your interests vary

CALCULATION METHODS
1/4 mile Calculator TIPS
Gear calculator TIPS
Wheel Offset Calculator
Automotive Calculators
Tech Info - LT5 Horsepower and Torque Calculations
Tech Info - ZR1 Differential Gearing and Vehicle Speed Calculations
Tech Info - ZR1 Wind Force, Rolling Resistance, Drivetrain Loss Calculations
Tech Info - LT5 Camshaft Timing Calculations
Tech Info - LT5 Pressure Drop In Oil Lines Calculations
Tech Info - LT5 RC SL4-205 injectors (500+ hp) Calculations
Tech Info - LT5 Summary of Camshaft Timing from Start to Finish
Tech Info - LT5 Timing Diagrams
Tech Info - L98 Frisbee Horsepower
Tech Info - LT5 Coolant Flow Calculations

Last edited by Dynomite; 08-03-2014 at 12:28 AM.
Dynomite is offline   Reply With Quote
Old 08-02-2014   #169
WVZR-1
 
Join Date: Oct 2004
Posts: 1,889
Default Re: 4.10 gears...not what I expected.

I thought I'd keep this in a different post but you should be able to calculate your actual tire diameter using a formula also OR maybe just use it to confirm your measurements. Tach would need to be very accurate.

MPH X gear ratio X 336 / RPM

In the above 60 MPH X 3.45 X 336 / 2960 = 25.4 (a match to what I measured years ago) and Dominic's 60 X 3.73 X 336 / 2864 = 26.25 (what Dominic mentioned measuring)

Clint, you could use this formula with your tires already mounted and measure to confirm.

Cliff - I'm guessing my numbers maybe passed your test.

Last edited by WVZR-1; 08-02-2014 at 11:21 PM.
WVZR-1 is offline   Reply With Quote
Old 08-03-2014   #170
Hog
 
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
Default Re: 4.10 gears...not what I expected.

Just some general observations about the last couple pages

After a few burnouts all these numbers go out the window, esp. on soft tires. Then factor in tire growth due to the centripetal/centrifugal force changes at speed, tire pressure while driving, the effects of wheel alignment on tire heating, type of gas the tire is inflated, plus the manufacturing tolerances of the tires themselves, even tread squirm could be thrown into the convo.

This why there is a "fudge factor" built into any modern ABS or stability system. Accuracy has its place.

IMO If you are going to go through the trouble of a ring/pinion change, you might as well make it worthwhile.

The usual course of engine modification will move the power/torque corves to the right oi the graph, with highly modified engine making less torque at lower rpms. This would necessitate lower gearing to allow for driving below the torque.
More power=more revs(N/A)=more gear (all else equal)
__________________
peace
Paul

ZR-1 Net Registry Member #1494
Hog is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020