ZR-1 Net Registry Forums
Page 13 of 18 « First 39101112 13 14151617 Last »
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   Frankenplenum (http://zr1.net/forum/showthread.php?t=24504)

SAM/CH ZR-1 05-01-2015 07:54 PM
Re: Frankenplenum
 
Quote:
Originally Posted by LGAFF (Post 224894)
I think the TB will be fine at 63.5. Monoblade would be better, but I wonder if cams might be restrictive I have the split duration intake on these
A interesting Job. What are the cam specs if it's not a secret?

LGAFF 05-01-2015 07:56 PM
Re: Frankenplenum
 
These are 222 .415 primary and 236 .425 secondary. The other cams I have are all 236 .425

LGAFF 05-01-2015 08:40 PM
Re: Frankenplenum
 
Some Epoxy helps clean up the looks

http://i134.photobucket.com/albums/q...f/DSCN6305.jpg

http://i134.photobucket.com/albums/q...f/DSCN6300.jpg

-=Jeff=- 05-01-2015 11:03 PM
Re: Frankenplenum
 
will it fit under the hood or will you need to cut the hood? remember I have one to swap if you are going to cut....

LGAFF 05-10-2015 07:25 PM
Re: Frankenplenum
 
Here is a runner inside the plenum; its was mildly ported before; I am opening up the runners completely(This is a work in progress)

before
http://i134.photobucket.com/albums/q...f/DSCN6306.jpg

After
http://i134.photobucket.com/albums/q...f/DSCN6307.jpg

-=Jeff=- 05-10-2015 08:43 PM
Re: Frankenplenum
 
Will this fit under the hood?????????

LGAFF 05-10-2015 08:55 PM
Re: Frankenplenum
 
Going to be close, the lid is thicker than my original plan by 1/4 inch

Bearly Flying 05-11-2015 03:45 AM
Re: Frankenplenum
 
Be interesting to see a dyno run after you get this manifold in service....

Good Luck Lee.

XfireZ51 05-11-2015 08:18 AM
Re: Frankenplenum
 
Quote:
Originally Posted by Bearly Flying (Post 225531)
Be interesting to see a dyno run after you get this manifold in service....

Good Luck Lee.
I would like to see an A/B comparison.

LGAFF 05-11-2015 11:15 AM
Re: Frankenplenum
 
Going to leave the lid bare...what color should I make the rest of the plenum....I know its lipstick on a pig, but...


All times are GMT -4. The time now is 02:19 PM.
Page 13 of 18 « First 39101112 13 14151617 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025