ZR-1 Net Registry Forums - Tech II scanner

Page 2 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Tech II scanner (http://zr1.net/forum/showthread.php?t=25184)

G8nightman

06-03-2015 03:14 PM

Re: Tech II scanner

Quote:

Originally Posted by We Gone (Post 226895)

Or just get a set of these. Gordon's Fault Code Diagnostic Grounding Plugs

https://www.gordonkillebrew.net/Products

Thanks for the info and the Link but the # on the site aren't working for me to order the plugs I will just use some wire and ground out the correct pins

RussMcB

06-03-2015 03:19 PM

Re: Tech II scanner

Quote:

Originally Posted by Hib Halverson (Post 226894)

<snip> For more diagnostic info on SRC, see this story on the CAC site

Hib, I found your article very useful. Thank you.

Link: http://www.corvetteactioncenter.com/...fx3/index.html

Quote:

Originally Posted by We Gone (Post 226895)

Or just get a set of these. Gordon's Fault Code Diagnostic Grounding Plugs

https://www.gordonkillebrew.net/Products

I was very tempted to get that, but then figured the $50 is worth saving for something else.

Demps

06-03-2015 03:30 PM

Re: Tech II scanner

http://www.zr1specialist.com/HAT%20W...0Info/aldl.htm

iPhone won't let me hyperlink it.
Ted

G8nightman

06-03-2015 04:01 PM

Re: Tech II scanner

Thanks for all the info guys.

Billy Mild

06-03-2015 05:05 PM

Re: Tech II scanner

It is next to impossible to reset the SRC light properly with a paper clip. Just saying.

George Maz

06-03-2015 06:24 PM

Re: Tech II scanner

Quote:

Originally Posted by G8nightman (Post 226897)

Thanks for the info and the Link but the # on the site aren't working for me to order the plugs I will just use some wire and ground out the correct pins

I have those Diagnostic Plugs & Guide. Your welcome to borrow them anytime. I can meet you in Queens Borough, just PM me your cell.

All times are GMT -4. The time now is 07:52 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page