ZR-1 Net Registry Forums - Clutch fluid low

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Clutch fluid low (http://zr1.net/forum/showthread.php?t=27202)

Re: Clutch fluid low

Quote:

Originally Posted by Fully Vetted (Post 251785)

So, these are tough to find? Like the belt tensioner?

OEM, yes.. aftermarket cast are readily avail.

Jim's prices are what they were when you could get them from GM/ NAPA etc. years ago

Re: Clutch fluid low

Quote:

Originally Posted by -=Jeff=- (Post 251786)

OEM, yes.. aftermarket cast are readily avail.

Jim's prices are what they were when you could get them from GM/ NAPA etc. years ago

I just emailed him for a quote for a rebuild

Re: Clutch fluid low

Good to know. I'll keep my peepers peeled.

Re: Clutch fluid low

Quote:

Originally Posted by Fully Vetted (Post 251789)

Good to know. I'll keep my peepers peeled.

Sure you can wait? ;) lol

Re: Clutch fluid low

Group rate would be awesome.

Re: Clutch fluid low

Quote:

Originally Posted by Fully Vetted (Post 251791)

Group rate would be awesome.

Concur. Will advise. I'm sure a lot of have a few dead spares laying around. I do.

Re: Clutch fluid low

Quote:

Originally Posted by GOLDCYLON (Post 251788)

I just emailed him for a quote for a rebuild

From ........Power Torque Systems
Appears that the Clutch Master is $160 + $40 Core Charge.
Appears that the Clutch Slave is $160 for 90' and $150 for 91'-95' with no Core.

I am not so sure the information is current on the Web Site........... Phone (641) 342-7446

Let us know the response you get in e-mail :cheers:

Re: Clutch fluid low

Quote:

Originally Posted by Dynomite (Post 251884)

Ok I have the info....

$50 for the slave and $60 for the master plus $13.45 shipping. He will only rebuild the original Lucas-Girling design with the 1/8th thick flange where the bolts go through. At this price point a group buy will not be an option but I feel this is a fair price. I will be sending my pair off. GC

Re: Clutch fluid low

Quote:

Originally Posted by GOLDCYLON (Post 251890)

So...........I wonder if these are Completely New Clutch Masters and Clutch Slaves that he advertises on the Web Site? I wonder what he does with the Clutch Master Core if you send one in?
It Appears that the Clutch Master is $160 + $40 Core Charge.
It Appears that the Clutch Slave is $160 for 90' and $150 for 91'-95' with no Core.

Anyway.......Who can complain about the $50 and $60 price......at that price he will get several I am sure. He must take the one you send in for rebuild and replace seals and maybe plunger only for $50 and $60?

I will check all of my Masters and Slaves to make sure. Is there anymore information regarding the Lucas-Girling design identification with the 1/8th thick flange and does that apply to both the Master and Slave?

Re: Clutch fluid low

I wonder if Tilton or any aftermarket manufacturer has a compatible master. I have the McLeod twin disk clutch on my 93 lt1 car and it came with an aluminum master.

maybe Jerry would be willing to speak with some manufacturers ? im sure we could come up with enough interest for a group buy to start. I believe all c4s LT1/4/5 share the masters as well? positive there would be interest there as well.