Re: I-PASS mounting on the Z
 

I positioned it under and slightly in front of my Valentine 1 radar detector in the windshield cutout. With the V1 securely attached to the windshield with suction cups and the I-Pass underneath, I pushed the V1 tight against it. It held it there fine and always worked at the tolls. (FYI, my V1 was hardwired with the wire source at the fusebox on the passenger side of the dash [accessible when the passenger door is open]. The wire is then run up under the dash and out the grill in the dash center. Had to make a small notch in the edge of the grill. And full disclosure: Marc Haibeck did the actual work.)--Bob

Re: I-PASS mounting on the Z
 

Being registered in Florida my Z does not have front plate. License plate mount transponder fit nicely inside the front plate filler trim and works great.

Re: I-PASS mounting on the Z
 

I think using the radar cutout makes the most operational sense. If it doesn't work I get a ticket and they get to read my plate!! LolAttachment 7460

Sent from my 2PS64 using Tapatalk

Re: I-PASS mounting on the Z
 

I had no idea you had ties to Florida Yun!!!

Re: I-PASS mounting on the Z
 

. Ha, ha! Nice looking Z and cool plate!

Re: I-PASS mounting on the Z
 

I lived near Orlando (Lake Mary) for 8 years.

Re: I-PASS mounting on the Z
 

Cool! Thanks for sharing. I would have never guessed it.


Sent from my iPhone using ZR-1 Net Registry

I-PASS mounting on the Z
 

I used 3M Velcro on a plate mount I-PASS. Used it 14 times over the past six months with no issues. Works great concealed.


Sent from my iPad using ZR-1 Net RegistryAttachment 10131Attachment 10132

Re: I-PASS mounting on the Z
 

I have the OEM windshield and have tried several locations for the I-Pass here in Illinois. The only place it reads for me is the windshield cutout.
I love the idea of placing the transponder behind the front plate cover, that would solve a lot of issues.

Re: I-PASS mounting on the Z
 

I've had my NY EZ-Pass in the radar cut-out for quite a while. Works well there.

Front radar detector is mounted inside the front bumper near the front license plate. Front plate is where they target radar/laser.