Re: LTPWS Sensor
 

http://i119.photobucket.com/albums/o...OL-KORVETT.jpg

-- NO -- ABOVE THE CB RADIO IS THE CORRECT WAY !!!

Re: LTPWS Sensor
 

WARNING: DONT attempt the tape method of repair. It gets hot and wet in there, and poof goes the adhesive. If the sensor still works - (you can check it by shaking it vigorously while driving to see if a Low Tire Pressure indication shows up) then get someone here's undamaged shell, transfer the green sticker, and mount up.

Also, the 93-95 sensors wont work with 90-92 cars (their frequencies changed), and you can tell the difference by the color of the shell - black for the early version, white for the later.

Re: LTPWS Sensor
 

I busted one the other day at about 140mph...i knew exactly what is was since it started vibrating pretty viciously. I know it has been covered before but i couldnt find the thread on it....but if I remove them from my 91 completely will the light still stay on? I have the right front one out already.

Re: LTPWS Sensor
 

Yes on the 90-91 only you can pull them all out and the light will not come on. 92-95 you have to pull the blub from the DIC or resort to the alabama black tape method over the service LTPWS section. GC

Re: LTPWS Sensor
 

Well almost right. Ive been told a few times the LTPWS computer will read either frequency it really doesnt care what it is. The trick is to have a matched set of four. Either all White or All black (LF, RF, LR, RR mind you :wink: )and it doenst matter what model year. But you are correct the black body sensors were at time of delivery for the early model and the white/cream colored body ones are for the later 93-95 models. Hopefully somebody will verify this is infact a true and tested statement.

Re: LTPWS Sensor
 

I have the sensor you need taken from a working system it is good.

$150 plus shipping

Re: LTPWS Sensor
 

I have the sensor you need taken from a working system it is good.

$150 plus shipping

Re: LTPWS Sensor
 

thanks...but I think I'll just pull them all and forget about it.

Re: LTPWS Sensor
 

i`ve got all of my sensors off my 90 model except the RR pulled and hanging by a nail on the wall. they`ll never be reinstalled. anybody got anything to trade for them? anything for a Z or off a big block chevy would do.

Re: LTPWS Sensor
 

Richard I have all the vent plastics for a 90-93 Dash in the correct black with orange dots, A complete glove box with door (in black). A LT5 metal throttle cover shield and a LT5 metal Map sensor bracket and a pair of plenum gaskets unused of course Id be willing to trade. GC aka Daryll