ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   F!!!! Oil Leak... (http://zr1.net/forum/showthread.php?t=14689)

Daniel_Mc 05-20-2011 02:49 PM

Re: F!!!! Oil Leak...
 
Paul,
That makes me feel a little better (I guess LOL). I lost about a quart and a half of oil when the sensor went. I have some of the ?freckles? under the passenger side floor board and rear wheel well.

Daniel

jrd1990zr1 05-20-2011 09:15 PM

Re: F!!!! Oil Leak...
 
I had a problem with a leak and it was caused by one of the bolts (there are only 3) holding the oil filter housing losening up causing a leak.

It might make some sense as Jerry mentioned to remove the oil filter adapter if you have clearance problems. I'd use a new gasket (from Jerry) and torque the three bolts as shown in the FSM. I think you are supposed to use threadlock on them, check the FSM.

Good Luck :cheers:

Daniel_Mc 05-24-2011 11:25 AM

Re: F!!!! Oil Leak...
 
jrd1990zr1,
I did just that. I was worried that I might have to remove the filter adapter so I went ahead and got the gasket. Do you happen to know the torque #'s? I need to get a FSM!

Daniel

VetteMed 05-24-2011 12:43 PM

Re: F!!!! Oil Leak...
 
I think this is the source of my persistent oil leak as well. I was pretty stupid for not replacing it when I last had the filter housing off.

VetteMed 05-26-2011 09:16 AM

Re: F!!!! Oil Leak...
 
Quote:

Originally Posted by A26B (Post 114940)
Nice to have met you in BG!!

If not the oil cooler lines:

In this photo, you can see the sensor that typically fails, causing an oil leak in that area. It is under the oil filter, above where the arrow is pointing, and angles downward. Pretty hard to get to, but can be done with the right tool configuration. This sensor is for the low oil pressure light.

http://i190.photobucket.com/albums/z...AcessCover.jpg

In this pic, what is the plate that the arrow is pointing to? And what size are the bolts that secure it?

Thanks
Andrew

jrd1990zr1 05-26-2011 10:41 AM

Re: F!!!! Oil Leak...
 
Quote:

Originally Posted by Daniel_Mc (Post 115556)
jrd1990zr1,
I did just that. I was worried that I might have to remove the filter adapter so I went ahead and got the gasket. Do you happen to know the torque #'s? I need to get a FSM!

Daniel


Daniel,

I'll look it up and post later tonight. Sorry for the delay in responding.

John :cheers:

Daniel_Mc 05-26-2011 01:12 PM

Re: F!!!! Oil Leak...
 
John,

Thanks! I honestly haven't had a chance to do anything with the car the past 2 days. Hopefully tonight I will have a couple of hours.

Daniel

-=Jeff=- 05-26-2011 02:17 PM

Re: F!!!! Oil Leak...
 
Quote:

Originally Posted by VetteMed (Post 115687)
In this pic, what is the plate that the arrow is pointing to? And what size are the bolts that secure it?

Thanks
Andrew

7mm or 8mm and yes oil can leak from there. if you can get to it.. let me know how, I want to check mine as well

VetteMed 05-26-2011 02:19 PM

Re: F!!!! Oil Leak...
 
Quote:

Originally Posted by -=Jeff=- (Post 115708)
7mm or 8mm and yes oil can leak from there. if you can get to it.. let me know how, I want to check mine as well

I've got my oil filter housing removed right now, and am thinking that while my AC system is apart, I may have some extra clearance to reach down in there with a box-end wrench. I will let you know what I am able to come up with.

jrd1990zr1 05-26-2011 07:11 PM

Re: F!!!! Oil Leak...
 
Daniel,

19 ft-lbs

Good luck, John :cheers:


All times are GMT -4. The time now is 08:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025