Re: Ported Intake
 

I have a set of ported IHs, when you port these often you nick the O-ring area....on this set I opened one up alittle more than normal.....but it remains sealed and dones not vac leak, I tested it at 25 mmHG. More of a mental thing I would rather not tell someone after they pay for it...

I will stand behind it 100% for as long as you own the car.

Will do a core exchange at $625....shipped, $100 off the normal cost with shipping

Re: Ported Intake
 

top

Re: Ported Intake
 

Lee Ported my Plenum, Airhorn and IH (Marc H did my TB) - I added 50 RWHP on the dyno after the port - it was was well worth it!

Re: Ported Intake
 

Thanks Glenn!

Re: Ported Intake
 

Finished another one:

http://i134.photobucket.com/albums/q...f/DSCN5104.jpg

Re: Ported Intake
 

Sexy!;)

Re: Ported Intake
 

How much to powder coat it also?

Re: Ported Intake
 

Intake porting $700
Powdercoat: $250 as is
PC with sanding smoother surface $325

Chip: $200 (could be more or less , I would have to source this)

This is about $1-2K less than with most others...

Re: Ported Intake
 

Recently ported and Pcd set for a customer

http://i134.photobucket.com/albums/q...f/DSCN5325.jpg

http://i134.photobucket.com/albums/q...f/DSCN5328.jpg

Re: Ported Intake
 

That's impressive. Was there any other work done? Chip,etc?